Bafang Bsshd no power

[Bikestick]

I just put a Bafang BSSHD 1000w,52v,DPC010 display with 20AH battery on my MTB.it turns on, display works fine without any codes. No mater witch mode its in there's no power from motor. and there's a three wire plug that is a battery communication cable (looked it up) that goes to nothing I can see. I have checked all plugs and pins are good 2.

 

[offGridDownUnder]

there's no power from motor

Um... do you mean there is no power to the motor? That's electrical measurement - how do you know, please? How did you measure that?

Do you mean the motor does not turn (that's "from")? Does it viibrate, or make any sounds?

Did it ever?

Did you assemble this from parts, or did it come as a kit from a single source?

Is there a power cut-off in the system? For instance, do you have break levers with switches to tell the motor to cease power, or a gear change sensor which can do the same?

You mention you checked the plugs and pins are good - that speaks to some level of knowledge. Knowing more of what you have/can do makes it easier to interpret what you report, and for us to phrase what we suggest to you. What experience do you have?

 

[Bikestick]

It is new, just put it together yesterday. The motor doesn't turn at all. Doesn't vibrate or even make a noise. I built a 6000w, 8000w, 12000w already. Just trying to build 1 that looks legal. Hydraulic brakes with sensors ,shift sensor, speed sensor. Battery is fully charged.

 

[fechter]

Try disconnecting the brake wires.

 

[Bikestick]

That did it. It works. thanks man. that was easy.

 

[offGridDownUnder]

Try disconnecting the brake wires.

But do the brake switches now disconnect the motor? Is it a matter of a further setting change to switch the brake action from closed switch to open switch or vice versa?

 

[Bikestick]

Your right I'm Shure. Haven't taken it for ride yet. I don't remember anything in the settings but I will look tomorrow and a ride. Now I guess I need to figure out why they don't work. There just sensors and magnets.

 

[Bikestick]

Your right I'm Shure. Haven't taken it for ride yet. I don't remember anything in the settings but I will look tomorrow and a ride. Now I guess I need to figure out why they don't work. There just sensors and magnets.

 

[Bikestick]

I will also look into the settings again.

 

[Apartunis]

But do the brake switches now disconnect the motor? Is it a matter of a further setting change to switch the brake action from closed switch to open switch or vice versa?

It is only a matter of not using parts whose only function is to stop the bike from working.

 

[Bikestick]

Fixed it. It was the brake sensors. I had them working backwards. I had to put different brakes on the bike for the sensors to work and now works great. Thanks to all for the advice.

 

[fechter]

Glad you got it working. BBSHD is a great motor.