Recent content by Mark H

Hmmm

In January we will have some ex demo Falco systems for sale. We will offer these at a much reduced price to any of you guys who live in the UK. In return we would like feedback/reports photos and videos. If any of you are interested please call us at Team Hybrid 01329 832068

The Falco system can be set to the customers requirements, especially useful for those with a disability. http://www.youtube.com/watch?v=Si4-exkFVK0&feature=c4-overview&list=UUqEAbLtx8q3YPB4t81C9tCQ

Epic build! That is all ;-)

As of yet I have not tried to use a third party battery that is outside of our proscribed nominal voltage range. I have had no issues using the AllCell packs at either 36 or 48v. If you stick to those nominal voltages there shouldn't be any problems. I've not tried anything with 52v so have no...

Check out this video if you haven't already: http://youtu.be/-U078iJ8CuY This was using a 250w Faclo motor. It's by no means my best riding, but to illustrate that you can do wheelies with the Falco motor, it works quite well! Plus bunny hop the bike and jump it with good amount of control...

The Standard 750w motor wouldn't be the one for closing on your 100Nm goal with a stack width of 40mm. But the 1000w/1500w motor will get close to that as standard (I believe the quoted figure is 80Nm). I've just looked at the website, and it's quoted as being 35-55Nm, but I think it is still...

Why not have a look at one of these!! Falco HXM 750w http://youtu.be/Qo_zotTo9pE The 212kph was no load on a 20" wheel @48v! I get over 30mph out of the 250w system @36v in a 26" wheel with my eyes closed :lol: Easily over 35mph on the 750w motor when ridden. I'm biased of course, but you...

Awesome! That's great, I look forward to seeing your machine! What frame are you putting the motor into? If you don't mind doing it, you can fit an 8spd multi freewheel, all you have to do is stretch/open the rear dropouts by a couple of millimetres and the 8spd will fit. You may also need to...

Yeah, we're talking hub Falco HXM hub motors on various power platforms from 250/500w chassis to the 750w chassis. As for pedalling or not, the 250w and 500w platforms are designed to be Pedal assist motors and the 750w upwards are configured to allow for throttle only use with no pedalling...

The battery from the Craigslist site (48v LifePo4) would work perfectly and has pretty much the same output performance as the AllCell 48v20ah pack I'm going to be using here with our 750w motor. I can't remember off the top of my head how much leeway there is on the 55v limit, but it's set for...

Hi All, I've been putting together a KMX trike for the last few weeks in my spare time at work to try and show what can be achieved with "off the shelf products" and in particular show case the Falco e-motor range. By "off the shelf products" I am referring to drive components that don't...

Hi there I thought I'd join in the fray here! @ 36v I can achieve over 30mph on the 250w Torque Sensor (TS) only motor with my eyes closed! My record so far is 43MPH (Indicated). That was slightly down hill but I can't get that sort of speed on my own! When hooked up with a CA the motor is...

Due to a life threatening illness Team Hybrid have new management who have taken the decision to cease all electric bicycle related business. All our efforts are focused on our core business of hand cycle manufacture. Team Hybrid.