Search results

Date Relevance Most replies

  1. P

    open External hall effect sensor mount

    Most of the escs sold by Alien are made by FlierESC. Flier has garbage quality control and high failure rate with pretty much everything they make. I'd recommend a different esc. FVT (Favourite) makes solid escs for e-boards and multirotors in my experience, so I usually use their products (or...
  2. P

    open External hall effect sensor mount

    Any updates? I'm thinking of adding hall effect sensors on a Tacon 160
  3. P

    NGV - Next Boards - hub motor 4wd (Guinness 59.55 mph)

    What about 4wd with a satellite config? 4x Tacon 160s (245kv) on 10s with a 1:1 (or slight reduction) gearing (should be enough torque to start with 4 motors) could reach 100+mph :twisted:
  4. P

    Adding bunch of supercaps to your e-board?

    It sounds useful for 18650 packs with a relatively low continuous amp discharge rate.
  5. P

    AngelDust|Trampa HolyPro 35|SK6374 168kv|E-TOXX|Dual VESC

    :mrgreen: :mrgreen: :mrgreen: :mrgreen: Wow that made me burst out laughing (I saw the evolve and enertion versions)! Nice work man! Mountainboards ftw!
  6. P

    Jelly Board - .22 bulletproof transparent glass-like decks!

    I imagine a polycarbonate deck like that would be pretty heavy and/or flexy
  7. P

    My e-board caught fire

    Was that with a BMS?
  8. P

    Austin's E-MTN Board Build

    I run 60psi but I use Ground Industries Mak tires (also rated for 60psi)
  9. P

    Working on Custom Carbon Fiber Deck

    Something around 38in so I could fit my 10s4p battery :mrgreen:
  10. P

    Working on Custom Carbon Fiber Deck

    Any chance of a longer version of that 30in deck? I was set on a never summer reaper or wefunk mach 1, but I like the idea of an aluminum deck.
  11. P

    Putting the Junk in the trunk

    http://www.electric-skateboard.builders/t/project-paragon-trampa-e-mtb-tacon-160-custom-composite-enclosure-chain-drive-ongoing-build-log/1485 Look at my build ^
  12. P

    $3 ESC is this for real!?

    fvt120A for $50-60
  13. P

    PSA: do not get ripped off by Enertion

    I know someone who'd be willing to buy the faulty space cell if the end user does not want to fix it.
  14. P

    Project Paragon | Trampa E-MTB | Custom Enclosure

    This will mainly be a street build, but I'll go off-roading once in a while. To mitigate most vibrations, I plan to mount everything on rubber pads and use loctite on every screw. I haven't fully built up the board yet (I'm waiting on sprockets), but I noticed that some of my truck vibrations...
  15. P

    Project Paragon | Trampa E-MTB | Custom Enclosure

    Hello, After completing a pintail build and riding around, I nearly fell a few times due to going over small rocks. I have also experienced speed wobble at around 25mph. To kill two birds with one stone; I decided on a mountainboard build. Most electric mountain boards that I have seen looked...
  16. P

    Problem with diyelectricskateboard

    his name is torqueboards. try contacting him @ electric-skateboard.builders
  17. P

    SUPER CHEAP QUALITY PNEUMATIC WHEELS

    Here's some more info I found.
  18. P

    SUPER CHEAP QUALITY PNEUMATIC WHEELS

    This is what I found online: http://www.surfingdirt.com/forum/showthread.php?t=437 ^^ General consensus on that thread is that the Maks tires last way longer than MBS tires when used on the road; they are also very grippy. Also, they used to sell for $70+ a set (for just the tires) before Ground...
  19. P

    SUPER CHEAP QUALITY PNEUMATIC WHEELS

    The Ground Industries Terraintula wheels are aluminum with carbon fiber. The Crosshair hubs are plastic. They fit mountainboard trucks so 12mm axle, but you can probably switch out the bearings if you want. Here is the description on the terraintulas: "These are brand new Ground Industries 200 x...
  20. P

    SUPER CHEAP QUALITY PNEUMATIC WHEELS

    Just found this on ebay and ordered a few sets. http://www.ebay.com/sch/grimfx/m.html?_nkw=&_armrs=1&_ipg=&_from=
  21. P

    SUPER CHEAP QUALITY PNEUMATIC WHEELS

    Just found this on ebay and ordered a few sets. http://www.ebay.com/sch/grimfx/m.html?_nkw=&_armrs=1&_ipg=&_from=
  22. P

    |Pen E-Board| Smallest E-board ever|Friction Drive|

    Honestly I don't think a longer board is required but you may want to switch the plastic deck for a wooden deck, no one I know would enjoy going at high speeds on a penny (deck is too flexy and may result in speed wobbles)
  23. P

    |Pen E-Board| Smallest E-board ever|Friction Drive|

    Lol it's so funny, I just started a project like this a few weeks ago, my mount will be polycarbonate though and I'm using a cheap walmart board that is about the same size as a penny I wish you the best of luck :)
  24. P

    First Electric Board - Need Expert Help

    The board doesn't need to have much power (just around 10-15mph top speed) since I'll just be using it to cruise around on flat ground
  25. P

    First Electric Board - Need Expert Help

    Would one of these batteries work?: http://www.hobbyking.com/mobile/viewproduct.asp?idproduct=15521
Back
Top