Search results

  1. M

    Stuck in troubleshooting on dead BBSHD..... - please help

    Hi Bob. Thanks for your reply. Yes - the display is alive. I can change mode as usually and switch it on and off. I never had e-brakes connected I have tried using a different throttle I have tried pedalling as well as giving throttle to get the motor spinning I have tried connecting...
  2. M

    Stuck in troubleshooting on dead BBSHD..... - please help

    Hello gents... Im stuck in trouble shooting with a dead BBSHD and I could need some help here.... The motor just stopped working one day and since then i´ve done the following: Replaced the controller - no result Replace the motor - no result I have tried to trouble shooting a bit and what...
  3. M

    50 amp BBS-HD at Luna

    Dear Gents - thank you very much for the input - much appreciated. The reason I´m even getting into this - is that I mainly use my mountain bike for singletrack - with a throttle only cabling solution. A small power increase would make this setup perfect. I have my battery in my backpack so...
  4. M

    50 amp BBS-HD at Luna

    Anyone have a spare wrecked BBS-HD controller ? I am in contact with a German specialist that will assist with making a new controller that can handle 50 Amp - semilar to what Luna has done. Need to send him the original controller in order for him to get an impression of how much space is...
  5. M

    50 amp BBS-HD at Luna

    I think the way to move forward is to develop our own controller. I cannot be that hard... I can make a 3D model of a casing semilar to the original controller cover on the BBS-HD, with the exact same mating face against the motor. After that we send the STEP (3D) file to a number of...
  6. M

    50 amp BBS-HD at Luna

    I contacted Eric at Luna cycles and asked specifically whether they were going to sell this controller seperately. The answer was crystal clear - No way - so you can just forget about this - sorry to say. I emphasized that a lot of BBS-HD owners would buy it immediately and even suggested...
  7. M

    Tuning the BBS-HD ??

    Wow things are getting ugly in here - I'm out! Let's see the results of the tests currently going on at Luna cycles and take it from there !
  8. M

    Tuning the BBS-HD ??

    I´ve been in contact with Luna Cycle and something very exiting is brewing there at the moment - based on their 50 Amp testing... They told me to stay tuned for updates....
  9. M

    Tuning the BBS-HD ??

    Now thats the spirit ! Agree ,0)
  10. M

    Tuning the BBS-HD ??

    That´s exactly the point of this thread ,0) What are the limitations for exceeding the 30 Amp ? There must be a reason that Luna Cycle use an external controller to run 50Amps on the Bafang BBS-HD here: https://www.electricbike.com/project-x-building-the-baddest-and-fastest-3000w-bbshd-ebike-ever/
  11. M

    Tuning the BBS-HD ??

    Exactly ! Wish that Lunacycle or someone else would start to put together a package for this purpose...
  12. M

    Tuning the BBS-HD ??

    Thanks for the replies... 65 amp is NOT what I want - as this has already been tested with bad results. What I want to know is whether the current limit can be increased further than the 30 amp - to a level around 40 or 45. Luna Cycles is currently testing the Bafang with 50 amp on an...
  13. M

    Tuning the BBS-HD ??

    Hi folks... I´m considering the possibilities of tuning the BBS-HD, by increasing the max current in the setup of the controller. Im fully aware that there are certain risks connected to this. I´m used to short maintenance schedules on motocross bikes - where the lifetime on a piston is...
  14. M

    Kill switch on main battery power supply ?? Options ?

    Thanks for the replies ! I think I might just hard wire the on/off wires from the controller and add a keyed contacter in my battery box - for cutting the battery supply - as i don't need an additional switch on the handlebar in that case. But let's say I'd use the type that are used for...
  15. M

    Kill switch on main battery power supply ?? Options ?

    Hello. I´ve ditched my display and all other cables, in order to only have the throttle and no pedal assist. I used to ride enduro motocycle which is why I find i natural to ride with the throttle only. I´ve made a new custom cable with two plugs - one for programming and one for the...
  16. M

    Programming the Bafang Middrive BBS01+BBS02

    Hello all ... Thanks for this useful thread. I just started programming my BBS-HD and there is one thing I don't understand. I want to be able to use the throttle at all times - without pedal assist. On the basic page I can adjust the "limit current" and "limit speed" at PAS 0. Sorry for...
  17. M

    Which battery for Bafang BBS-HD ?

    All right - then the way to move forward is the battery from Luna cycles i guess. Any one know a European dealer of those batteries ?
  18. M

    Which battery for Bafang BBS-HD ?

    I would prefer one of the round bottle mount batteries, but I can't find it with 30A continious discharge....
  19. M

    Which battery for Bafang BBS-HD ?

    Thanks for the replies Under which circumstances would the Bafang pull 30 AMPs continuously? When running full throttle ?
  20. M

    Which battery for Bafang BBS-HD ?

    Thanks a lot for the replies. I have been looking at this battery which seems to have a discharge limit of 25A - am I right ? http://www.aliexpress.com/item/Black-water-bottle-48V-13Ah-samsung-ebike-battery-with-lithium-battery-charger/32484715204.html
  21. M

    Bafang BBS-HD cabling ??

    Hi all - thanks for your replies... It is correct Tor - the cables are for gear sensor and rear / front light...
  22. M

    Which battery for Bafang BBS-HD ?

    Hello... I´m about to order a bottle mount battery for my Bafang BBS-HD - but I´m in doubt which battery to buy... Some bottle batteries have a max discharge capacity of 15amp... I´m not a genious regarding electric bike motors - but wouldnt I need 20 Amp if I my motor is 1000W with 48V ...
  23. M

    Bafang BBS-HD cabling ??

    Hello. Just received my new BBS HD, but there is no instruction manual. It should be kind of obvious to install, but i´m in doubt of some of the cables from the motor. I´ve connected the following: Display 2 x brakes speed sensor thumb trhottle Power supply There are three more cables...
  24. M

    A good quality full twist throttle ??

    Hello... Does anyone have a link to a place where you can buy a good quality full twist right han throttle ? I need one to use for my Bafang center motor on my bicycle - after ditching the display, to have only throttle while riding trails. Would it be an option to use one from an electric...
Back
Top