48v 1000watt 13s ebike shuts off

[Rocko]

Ya I shorted my bike one night and now it still work fine with no rider at full speed but with me on it it turns off when I try go full throttle every thing else seems OK I tested control for mosfet short you no power and motor wires its OK I taken it apart for visal inspection looks good charges fine I do not get it can any one help me it is my only way get around to take care my sick in the head women and I have no way pay bills of get food I really need help please please

 

[neptronix]

What part of the ebike did you short?

 

[E-HP]

Ya I shorted my bike one night and now it still work fine with no rider at full speed but with me on it it turns off when I try go full throttle every thing else seems OK I tested control for mosfet short you no power and motor wires its OK I taken it apart for visal inspection looks good charges fine I do not get it can any one help me it is my only way get around to take care my sick in the head women and I have no way pay bills of get food I really need help please please

Hopefully she doesn’t read the forum. When it turns off, does it turn back on by itself? Any info on your battery (specs, label, etc.)?

 

[Rocko]

Hopefully she doesn’t read the forum. When it turns off, does it turn back on by itself? Any info on your battery (specs, label, etc.)?

batt. is a 48vdc 15amp 1000watt

Hopefully she doesn’t read the forum. When it turns off, does it turn back on by itself? Any info on your battery (specs, label, etc.)?

No I have a switch in between to turn it off then on it work

 

[E-HP]

What part of the ebike did you short?

Is it a new conversion? have you configured/set-up the controller at all? Pictures are very helpful in identifying components and errors.

 

[Rocko]

Connecting plus minus battery to controls I put switch between as reset

 

[Rocko]

Hopefully she doesn’t read the forum. When it turns off, does it turn back on by itself? Any info on your battery (specs, label, etc.)?

No I have turn it off then on

 

[E-HP]

Your description of your system and components is inadequate for diagnosing the problem. Absent pictures or links to the system purchased, labels of the battery and controller, or any other technical details, best guess is you need to start saving up for a decent battery that's adequate for powering a 1000W hub.
Could be something else, but without more info, that my best guess. Others folks may have other opinions.
Good luck, I hope you get it working, and recover from your crash.

 

[Rocko]

Your description of your system and components is inadequate for diagnosing the problem. Absent pictures or links to the system purchased, labels of the battery and controller, or any other technical details, best guess is you need to start saving up for a decent battery that's adequate for powering a 1000W hub.
Could be something else, but without more info, that my best guess. Others folks may have other opinions.
Good luck, I hope you get it working, and recover from your crash.

Ya but it was working fine

 

[Rocko]

Ya but it was working fine

I say its control but no itested it check out so battery or bms i think

 

[Rocko]

I say its control but no itested it check out so battery or bms i think

I think I will try adding 6 non 0.1vdclower

 

[E-HP]

Not sure what it is, but sounds like you have a plan!
Be sure to report back to close the loop once you get it all sorted out. I'd be interested to hear what the final solution ends up being.

 

[Rocko]

still om it its controller read my post ok thank you

 

[E-HP]

Good progress. Thanks for the update!

 

[Rocko]

I am going in now I got a life line to door nob time open it up figure it out I just got new one and got wrong kind dang it anyways what dum ass I am

 

[E-HP]

A small setback, but I’m sure you’ll overcome it

 

[Rocko19661]

Ya I shorted my bike one night and now it still work fine with no rider at full speed but with me on it it turns off when I try go full throttle every thing else seems OK I tested control for mosfet short you no power and motor wires its OK I taken it apart for visal inspection looks good charges fine I do not get it can any one help me it is my only way get around to take care my sick in the head women and I have no way pay bills of get food I really need help please please

i abandoned this control

 

[Rocko19661]

i abandoned this control

cancel this

 

[harrisonpatm]

cancel this

Are you asking for this thread to be deleted?

 

[E-HP]

Are you asking for this thread to be deleted?

Maybe the duplicate member ID?

 

[Rocko]

Ok I have had it with this darn bikei put new bms new controls bot battery maker got new motor now I have key throttle and I put switch on battery so do not dpsrk when I plug it in after I charge it right now I put reset switch as bike still turning off can I just tsck co I Ole 4 4 it 4,3 batter to see ifnit that or I just frustrated with hole deal been like month been trying fix it

 

[neptronix]

What kind of bike is this? one you built or bought?
Can we get a pic?

 

[Rocko]

I am buying more part be here to tomorrow 16s bms new 14ah battery new disk brakes gears chain tire tubes all on a mongoose Durham fir now but I have friend that owns machine shop and all frames I have seen are lame and gonna build my own and it will be better than everyone out there look out people there's new sheriff in town use to ease BMX as kid in El C
ajon speedway dirt track when Schwinn BMX at 13teen to16

 

[Rocko]

I gonna build 3 wheeler out of out collectors huffy bike for my wife its classics

 

[Rocko]

But I am still stump on why this darn thing keeps turning off past half throttle I did shirt it out one night dang t shorted when it all started but it do no t matter any mire as u will replace everything by tomorrow all brand new controls batter t HD tittle I just hope it is not my 47vdc 1000watt motor because I will have to replace my rim and I have the same motor brand new if motors ok I may get it machined to fit front wheel 2000 watts ta boy!!! It will be off the hook fast