Any 3D Printed Parts Needed? - I Have a Small Print Farm

[Braddudya]

Just curious if there are any parts missing in this hobby that can be 3D printed? Backets? Housings? Accessories?

I have a small print farm (6 FDM + 3 SLA) and am trying to find some products that I could produce between jobs. I would be happy to solve some problems for builders!

 

[PilotSteve]

Yes I need help. Not sure where your located but I'm near Everett /Arlington Washington. I'm wanting to build a scale model drone, before building a full size EVTOL aircraft. I left Boeing to build this but need some 3d printed materials for the scale model, as well as the modeling of the ducting, in the wing profile model that I already have, as am using EDF's inside the wing. I also need some RC/Drone know-how that I don't have either, using two servos for separate directed thrust, fore and aft, besides the EDF controllers side to side and connecting that wirelessly.

 

[amberwolf]

Yes I need help. Not sure where your located but I'm near Everett /Arlington Washington. I'm wanting to build a scale model drone, before building a full size EVTOL aircraft. I left Boeing to build this but need some 3d printed materials for the scale model, as well as the modeling of the ducting, in the wing profile model that I already have, as am using EDF's inside the wing. I also need some RC/Drone know-how that I don't have either, using two servos for separate directed thrust, fore and aft, besides the EDF controllers side to side and connecting that wirelessly.

Sounds like a good time to start a build thread over here:

Electric Aircraft

endless-sphere.com

and tell us in detail about the project, your knowledge (and lacks thereof); then those with the experience and info in the various disciplines can help out.