dwkayaks
10 mW
- Joined
- Mar 18, 2017
- Messages
- 21
Gee , does any one have recent experience setting up , Advance settings on a CADP V2.3 . Will the default settings work to operate the motor smoothly , or not ?
In the Grin CA V2.3 User Manual it mentions on page 16 item 8.8 "IntSGain" ,,, "at the risk of causing oscillations" ?
So my new Grin equipment ( throttle, 4835 controller, CA, 8 LiGo's and a brand new eZee 250RC ) are causing problems when test rides are getting "Shuttering" (Oscillations) motor performance at 10A / 40V on the CA and anything above 10 mph ,,, Ouch !
I unplug the CA and re-check with test ride , but still shuttering occurs , so is the problem in the controller instead of the CA , or will re-setting CA " limits " correct the problem , and if so what limit settings to use ?
Cheers , Douglas
In the Grin CA V2.3 User Manual it mentions on page 16 item 8.8 "IntSGain" ,,, "at the risk of causing oscillations" ?
So my new Grin equipment ( throttle, 4835 controller, CA, 8 LiGo's and a brand new eZee 250RC ) are causing problems when test rides are getting "Shuttering" (Oscillations) motor performance at 10A / 40V on the CA and anything above 10 mph ,,, Ouch !
I unplug the CA and re-check with test ride , but still shuttering occurs , so is the problem in the controller instead of the CA , or will re-setting CA " limits " correct the problem , and if so what limit settings to use ?
Cheers , Douglas