converting meanwell power suply into Lipo charger

[MrDude_1]

"In Series" there is the possibility-danger of the PSs not being electrically isolated.

Confirm that there is no "continuity" between the ground and DC- on all power supplies!
This would result in a short if PS cases touch each other, or a shock if you touch both at the same time.

Most MeanWells are properly "electrically isolated" but it is a very good idea to make sure.
Continuity check between DC neg and gnd and/or volt meter between separated PS metal cases (connected in series and powered on.)

If thats to him... yeah.
If its to me, I did that. lol Even though I know they SHOULD be ok on these, I still double checked it.

 

[Overclocker]

those looking for a meanwell clone might want to check this out. seems like a very faithful copy

http://www.aliexpress.com/item/400W-36V-11A-Single-Output-Switching-power-supply-for-LED-Strip-light-AC-to-DC-LED/936022784.html

[youtube]acnZs4eT2y8[/youtube]

here's the PCB of the Smun:

now here's a Meanwell (photo by DrkAngel https://endless-sphere.com/forums/viewtopic.php?f=2&t=55658 ):