I have the standard 500 watt Cyclone Kit, with Oro Throttle Assembly and Motor with internal controller. I recently bought the Cycle Analyst Version 2.2 Standalone Model (CA-SA) and have wired it with the external shunt and speedometer pickup to display all of the various information.
Now I want to wire the CA in accordance with Section 9.3 of the Manual (available at http://www.ebikes.ca/drainbrain.shtml) to directly regulate the current ("current throttle"). I read somewhere that the Cyclone Throttle is a "Hall" type throttle (as opposed to potentiometer type), and whether or not this is correct, I want to know if the Cyclone Oro throttle will work properly to regulate current when wired to the CA in accordance with Section 9.3 of the Manual.
Also, there are six wires inside the sheathed cable coming from the Cyclone throttle (gray, red, green, white, yellow ans black). According to information that I have found here: http://www.ypedal.com/cyclone2.htm, the yellow wire is the speed signal/adjustment wire from the throttle, which is the correct wire for input from throttle to post "Vi" of the CA and output from post "Th" of the CA to the controller. Can anybody verify this?
Now I want to wire the CA in accordance with Section 9.3 of the Manual (available at http://www.ebikes.ca/drainbrain.shtml) to directly regulate the current ("current throttle"). I read somewhere that the Cyclone Throttle is a "Hall" type throttle (as opposed to potentiometer type), and whether or not this is correct, I want to know if the Cyclone Oro throttle will work properly to regulate current when wired to the CA in accordance with Section 9.3 of the Manual.
Also, there are six wires inside the sheathed cable coming from the Cyclone throttle (gray, red, green, white, yellow ans black). According to information that I have found here: http://www.ypedal.com/cyclone2.htm, the yellow wire is the speed signal/adjustment wire from the throttle, which is the correct wire for input from throttle to post "Vi" of the CA and output from post "Th" of the CA to the controller. Can anybody verify this?