Direct drive brushless motor from powerchair.

[electric_snowshoes]

Yes, got to "place inline"! This is the fourth resizer program.

CCleaner is still finding Infanview items in the registry cleaner, at least 8 times over several days, maybe 20 files so far. Sticks like my Bearshare mistake from last year. No straight answer yet from Tylerdurdan why that wonky link is recommended, his reply is a criptic message, "its the computer". Before the download OR after???



Case & second of the two boards. The aluminum case heat sink area is solid, a good inch thick.

The 2 boards connect with a 20 pin connector, no harness in between, just board to board. Looks like I'll need to handle the board from both sides to align pins for reassembly, should static and/or current be considered here? I've only handled by the cable harness's to date.

 

[electric_snowshoes]

Thanks for contributing mettleramiel. Can you tell me why the add-on ground is there? All the harness parts are good quality with shrink wrap, etc, why cheap crimp-on connectors for this wire? Its 10 gauge. Is the purpose for static or higher current?

I haven't worked on many e-chairs, first brushless experience for me. As stated earlier its parts I removed from a scrapped platform, the controller was removed prior & given to me for my posting purposes.

 

[electric_snowshoes]

Motor winding pattern, black object is just the handiest item to block flash whiteout.

Thats the last of photos, unless requested of course.