Recently i finished by longboard build and have tested it and stuff. It works but its not as fast as i believe it should be. ~18km/h max on flat
I have the following components.
2x Turnigy 5000mAh 3S 20C Lipo Pack (In series 22.2v total)
Turnigy Aerodrive SK3 - 5055-280kv Brushless Outrunner Motor
FVT 120A BRUSHLESS WATERPROOF ESC, 1/10 1/8 RC Car Link:http://www.ebay.com.au/itm/221465739994?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Gear ratio: 14t to 40t
Transmitter: Some rc transmitter that ive had for a while.
On builds that ive been looking at with this motor and similar esc and battery configurations they reach top speeds of about 30km/h.
Im not really sure what limiting my speed. I think the esc could need configuring better (LCD programming card is on its way)
Any help would be great
Cheers.
EDIT: I will be posting my full build once ive completed it.
I have the following components.
2x Turnigy 5000mAh 3S 20C Lipo Pack (In series 22.2v total)
Turnigy Aerodrive SK3 - 5055-280kv Brushless Outrunner Motor
FVT 120A BRUSHLESS WATERPROOF ESC, 1/10 1/8 RC Car Link:http://www.ebay.com.au/itm/221465739994?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Gear ratio: 14t to 40t
Transmitter: Some rc transmitter that ive had for a while.
On builds that ive been looking at with this motor and similar esc and battery configurations they reach top speeds of about 30km/h.
Im not really sure what limiting my speed. I think the esc could need configuring better (LCD programming card is on its way)
Any help would be great
Cheers.
EDIT: I will be posting my full build once ive completed it.