Help me disassemble this aikema motor

[amberwolf]

Here's a thread of mine on a similar motor with a lot of pics

Currie / Tongxin Geared Hub Motor repair

The broken Tongxin/Currie geared hub arrived from Drewjet today; http://www.endless-sphere.com/forums/viewtopic.php?f=9&t=25089&start=0 (quoted after my part of this post so it doesn't vanish after the marketplace thread expires). First step was disassembly to see what might be wrong (problem...

endless-sphere.com

 

[zion]

Here's a thread of mine on a similar motor with a lot of pics

Currie / Tongxin Geared Hub Motor repair

The broken Tongxin/Currie geared hub arrived from Drewjet today; http://www.endless-sphere.com/forums/viewtopic.php?f=9&t=25089&start=0 (quoted after my part of this post so it doesn't vanish after the marketplace thread expires). First step was disassembly to see what might be wrong (problem...

endless-sphere.com

Thanks a lot, but event after pulling off the big cover, I dont see how do I take off the black part which seems to hide the wirering.

 

[amberwolf]

Thanks a lot, but event after pulling off the big cover, I dont see how do I take off the black part which seems to hide the wirering.

Well, you can look at the pics in the thread (and the threads linked from it), if what I already said in hte reply before hte one you quoted wasn't enough of a pointer.

Your motor isn't identical to mine, but it is built in essentially the same way.

the motor calbe itself passes all the way thru the axle, and as noted it may be glued in place, and what I said before may have to be done to get it out.