Davidcroatia said:
I boght it off a guy in Croatia ,
Was it working for him? (meaning, did you see it operating?)
Did you wire it exactly the same way he had it wired? If not, you should try that first, if it worked for him but not for you.
If you don't know how he had it wired, you first should ask him for a diagram or pictures of how he wired it, and then wire yours the same way.
qs motor 1000w and some controler kt36/48svprcl-xfc15l4, i have connected all as stated in pictures everywire to every color.
What *exactly* does "everywire to every color" mean?
If you mean that you connected all wires of the same color together, that can destroy the controller, as there are different voltages on some of those.
If you mean something else, please list clearly exactly which wires you connected to each other, or attach a picture to your post that clearly shows which wires are connected to each other.
Beyond that, I suggest looking at other "how to wire my controller" type threads, which give general guidelines and help figuring out that type of problem.
You dont' say what battery you are using. If it is not high enough voltage, or it is too high a voltage, it wont' work with your controller.
You also don't say exactly what your problem is. Stating clearly with as much detail as possible exactly what that is would help us help you.