I need to know how to by pass my lcd screan on a 48v controler

[Devin mullins]

Any help much appreciated

 

[Chalo]

If you want help, you'll need to provide more information.

 

[E-HP]

One, sometimes two jumpers on the connector usually does it.

 

[amberwolf]

What screen?
What controller?
What connectors?
What wiring?
What are you "bypassing", to make what happen?
What do you want the system to do for you when it's done?
Etc.

If you won't provide that, then you can look up all the other threads about this over the years and see if any of them have info that applies to your specific parts.

 

[Devin mullins]

I want to use this with out the scream

 

[Devin mullins]

Hears the case

 

[E-HP]

Sorry, can’t see the display connector or display in your pics; maybe someone else can help.

 

[docw009]

Let's see the display connector. I've owned the KT controller, Brainpower controller,, and something that runs an SW900 display. They all had the same pinout on the connector, and the same jumper method worked.

Most of us DIY'ers work off the connector end, rather than trying to decipher pin assignments on the controller board. When you go to that level, the manufacturer can use any names they want.