In Progress EEB Frame Bike Build

[Suspekt1]

Hey guys so Ive paid for everything now just waiting for it to arrive. Cant wait but my setup will be:

Enduro E-bike Frame (Black)
DNM USD-8 Front Forks (Black)
Race Face Atlas LTD Kash Money Gold Handlebar
52V Rectangular Battery 14S7P-30Q 20.7Ah - Em3ev
Crystalyte TC4080 In a 26" Rim
18 FET 4110 Controller
Hope Tech 3 E4 Hydraulic Brakes - Black Rotors 200mm Front and 180mm Rear
CA3 Cycle Analyst

just curious of anyones thoughts if this setup will be as good as I hope or is likely to let me down somehow.. the simulator gives somewhat good numbers but I dunno?
Ill post up Pictures and progress as it Happens also. Thanks Guys

 

[Cricket_Swe]

Nice handelbar :lol:

 

[Suspekt1]

So some of it has arrived.. Still waiting on a handlebar and battery now but got the Satiator also ready to go in there... this is it so far..

I got black push buttons installed for the back lights where ive mounted two LED strips just running Red lights and soon to have front lights. "the buttons glow blue once pressed into on"
I run the wiring up through the frame to have as much wiring hidden as possible..

Ive got the 18 FET 60A Controller I mounted to the top o the frame and fed the wires behind the frame best I can to try neaten it all up.
soon the battery and charger will be in there and ill be all set..

Loving the Hope Tech brakes they came fully made and feel such quality and look good next to the 4080 I think..

Oh and I need to finish the chain. and soon to come all gold bolts

Nice handelbar :lol:

Worst part is the handlebar is delayed so now I have No handlebar but a different one coming this week...