I had a Swytch bike kit but the battery/controller pack got stolen. I decided to try to buy a separate controller and battery to be able to use the existing motor. I thought I got all the required elements but when I put it together, the motor does not run. Here is what I have:
Original Swytch motor is a AKM 100SX, like this https://m.aliexpress.com/i/4000057871944.html
New controller: KT 36/48ZWSR-ffF02 with the waterproof Julet connectors already attached (so I don’t know the exact wire pin configuration)
Display is KT 900s
No throttle connection, only using a standard magnetic pedal sensor.
When I turn the system on, the display lights up, and when I turn the pedals the red LED on the pedal sensor does turn on. But the motor wheel does not turn at all.
What are some possible reasons why it does not run? Could the display be incompatible? Do I need to have a throttle? Is the controller not compatible with the motor? I haven’t yet tested the wires because that would require cutting the julet connectors off and I’d like to tile out other possible issues first.
Original Swytch motor is a AKM 100SX, like this https://m.aliexpress.com/i/4000057871944.html
New controller: KT 36/48ZWSR-ffF02 with the waterproof Julet connectors already attached (so I don’t know the exact wire pin configuration)
Display is KT 900s
No throttle connection, only using a standard magnetic pedal sensor.
When I turn the system on, the display lights up, and when I turn the pedals the red LED on the pedal sensor does turn on. But the motor wheel does not turn at all.
What are some possible reasons why it does not run? Could the display be incompatible? Do I need to have a throttle? Is the controller not compatible with the motor? I haven’t yet tested the wires because that would require cutting the julet connectors off and I’d like to tile out other possible issues first.