latecurtis
100 MW
There is no way to know.
I called e bikeling and they said the orange plug on the 4 to 1 wire was throttle. Not the yellow plug coming from the controller. That was for pedal assist.
So I spent the whole day splicing , soldering and taping the throttle wires to hook it up to the wires going to the orange plug like e bikeling said. Actually they told me to order another thumb throttle. I said hell no. The last one would not hook up as it was a frocking female plug. I did not see any with a male plug.
I made sure the other wires for the pedal assist were not touching and taped them off. When I turned the display module on I got blinking lights and still no power to the motor.
I am DONE !!!
I BEAT THE CONTROLLER AND DISPLAY MODULE WITH A HAMMER FOR 5 MINUTES. :lol: :lol: :lol: :lol: :lol:
The e bikeling controller and display module are total pieces of shit. The Bafang motors are cheap Chinese junk.
11:04.
I guess either the controller Dan sent is shot or the Bafang motor is burned out.
I wasted another two hours or so soldering , applying liquid electric tape and three long thin strips of real electric tape over each solder joint for nothing.
I have done all I can do with these Bafang motors. I am ready to either throw them out or ship them out.
Ernie's bike shops are close but was told they can not test the motors so the only other e bike shop around here is Pete's electric bikes and he is about an hours drive. He said he could test them but I am not driving all the way up there. I wasted way too much time on cheap Chinese garbage motors.
All I know is about 24 hours ago when I first turned on the display module hooked to the e bikeling controller it turned on just like both display modules did on both my e bikeling motors. When the motor did not work and I twisted those two wires together coming from the controller thinking they were for the power lock the display module never worked after that. Today when I hooked it up exactly like the guy from e bikeling said the display module still did not work.
Obviously I shorted something out in the controller anyway so destroying it with a hammer really did not matter as it would have never worked anyway.
I just do not know where I should send the motors. If anyone wants them for parts I could ship them if shipping is not a lot. Other wise I will throw them out as I do not have the room here in this small apartment for junk. Maybe someone can rebuild the motors. I am not sure.
If someone can actually get them to work then please let me know exactly how as I would like to know if this Battery clearinghouse place is selling burnt motors. If so they need to be reported. That is not right.
Please let me know.
Thanks.
LC. out.