serious_sam
10 kW
Shit. That's not good. What motor?madin88 said:furthermore all the magnets were loose because the FF did react with the glue and dissolved it.
Shit. That's not good. What motor?madin88 said:furthermore all the magnets were loose because the FF did react with the glue and dissolved it.
madin88 said:How is phase current of Nuc definded, is it peak or RMS?
If it's rated for 500A RMS it would be 700A peak
while a 500A peak rating would be around 350A RMS
madin88 said:I did put 10ml into same motor and after 2 years and 3000-4000km it was gone, and furthermore all the magnets were loose because the FF did react with the glue and dissolved it.
https://endless-sphere.com/forums/viewtopic.php?f=30&t=97880&start=75#p1436291serious_sam said:Do you know of any references or further reading for more detail on specifically why FW is more efficient on IPM motors?
Bartosh said:madin88 said:How is phase current of Nuc definded, is it peak or RMS?
If it's rated for 500A RMS it would be 700A peak
while a 500A peak rating would be around 350A RMS
Peak, measured.
lukashanak said:Connect randomly and run autodetection....gman1971 said:Hi VasiliSk,
So, do you know what the setup for the motor hall sensors on a Cyclone is? Does anyone who has done this for a C3000W motor have some wiring diagrams as to how to connect the C3000W motor to the Nucular?
Thanks.
G.![]()
punchy said:Hello all! Newcomer to this so please excuse any lack of knowledge, but during my ebike frame hunt, I came across Teleport and their controllers.
https://teleportbikes.com/controllers
So now I'm curious as to how these similar looking controllers compare to Nucular's controllers? I just quickly glossed of the specs and didn't really see much difference. Am I just looking at the same thing? Are these clones?
Hope to buy a Nucular controller one day!![]()
Turbomatic said:punchy said:Hello all! Newcomer to this so please excuse any lack of knowledge, but during my ebike frame hunt, I came across Teleport and their controllers.
https://teleportbikes.com/controllers
So now I'm curious as to how these similar looking controllers compare to Nucular's controllers? I just quickly glossed of the specs and didn't really see much difference. Am I just looking at the same thing? Are these clones?
Hope to buy a Nucular controller one day!![]()
Hello! It is Nucular controllers and Teleportbikes one of our dealers.
Yesjohn61ct said:Do dealers jump the queue?
serious_sam said:Are you using the "speed" or "speed/torque" control modes ? I had the same problem when using those modes. "Torque" mode works perfect though. I have 12F.
I'd like to be able to use those other modes sometimes, but it seems like an unuseable feature at this point in time.
Interesting.cheeko said:I use Speed and Torque, I wanted to throttle it without wheelie all time.
Works well
serious_sam said:Interesting.cheeko said:I use Speed and Torque, I wanted to throttle it without wheelie all time.
Works well
When I set "speed" or "speed+torque" modes, it seems like the controller tries to set the speed strictly to the throttle position, and does not allow coasting. I just get severe regen braking as I release the throttle while riding.