QSMOTOR,0.5-12kW Electric Hub Motor & Mid Drive Motor Manufacture China

[QSMOTOR]

Yes sir !

Well noted.
If any question, please feel free to contact with us.

Best Regards

 

[madin88]

@ roadrash
nice job! did the sidecovers come already black inside, or did you paint them yourself as well?

 

[QSMOTOR]

@ roadrash
nice job! did the sidecovers come already black inside, or did you paint them yourself as well?

I also wonder about it, it should not be painted.

 

[BCTECH]

@ roadrash
nice job! did the sidecovers come already black inside, or did you paint them yourself as well?

I guess he painted as he mentioned on his thread. I might do a test on mine before and after paint.

Vito, is that the new axle that roadrash has? The brake side cover seems to be new too

 

[ohzee]

@ roadrash
nice job! did the sidecovers come already black inside, or did you paint them yourself as well?

I also wonder about it, it should not be painted.

What would be the reason not to do that ?

 

[Motobikewheels]

@ roadrash
nice job! did the sidecovers come already black inside, or did you paint them yourself as well?

I also wonder about it, it should not be painted.

What would be the reason not to do that ?

I think he means it should not be painted from the factory just bare metal

 

[Stielz]

A few people are doing this as an attempt to improve heat transfer from the stator to the side covers. Black surfaces will absorb heat through radiation a higher rate. I have no idea how much difference it makes but will probably try it myself at some stage

 

[QSMOTOR]

What would be the reason not to do that ?
I think he means it should not be painted from the factory just bare metal

Vito: Yup, it should not be painted from QSMOTOR, just bare meta as below.

We even couldn't recongize our hub motor at firstly sight of your post picture, good job!

Best Regards

 

[QSMOTOR]

Dear All,

Now, for 205 Spoke Hub motor,
we are able to lace the spokes in a radial & 1X2 cross pattern as sample (for better customer service).
I would like to share some information here, please feel free to make comment if there is any problem.

Link of QS 3000W 205 50H V3 Spoke Hub Motor.
https://endless-sphere.com/forums/viewtopic.php?f=31&t=65972&p=1082427#p1082427

We're able to make below front and rear wheel set.
For other dimension wheel (e.g. 17"), we didn't do it before and we don't have the data about the length of spoke.
So, we couldn't provide it so far.

1. 18"X1.6" Radial Pattern Rear Wheel Set
18"X1.6" Black moped aluminium wheel rim
36X10G Spoke, silver color (Iron with zinc coat)
QS 3000W 205 50H Hub Motor, 36 holes, 150mm dropouts, black
For Rear Rim, Nipples, Spoke, $52.1 For Lacing & Truing, $25.0
Total cost $77.1

2. 19"X1.6" 1X2 Cross Pattern Rear Wheel Set
19"X1.6" Black moped aluminium wheel rim
36X10G Spoke , silver color (Iron with zinc coat)
QS 3000W 205 50H Hub Motor, 36 holes, 150mm dropouts, black
For Rear Rim, Nipples, Spoke, $53.9 For Lacing & Truing, $25.0
Total cost $78.9

3. 18"X1.85" 1X2 Cross Pattern Rear Wheel Set
18"*1.85" black moped aluminium wheel rim
36X10G Spoke (Iron with zinc coat).
QS 3000W 205 50H Hub Motor, 36 holes, 150mm dropouts, black
For Rear Rim, Nipples, Spoke, $55.7 For Lacing & Truing, $25.0
Total Cost $80.7
PS. We make it Iron with Zinc coat to match with the front wheel set.

4. 19"X1.6" 1X4 Cross Pattern Front Wheel Set
19"*1.6" black moped aluminium wheel rim
32X10G Spoke (Iron with zinc coat).
Front Hub 32 holes, M20 diameter, 110mm dropouts, black
For Front Rim, Nipples, Spoke & Hub, $ 84.0 For Lacing & Truing, $ 25.0
Total Cost $ 109.0
PS. We enlarge the spoke hole of front hub to fit with 10G spoke.

PS. The cost of wheel set for sample orders, for mass production, it will be much less.
Produce Time: 18-20 working days after receiving payment.

For more information and pictures.
1. Radial Pattern Rear Wheel Set
36X10G Spoke, silver (Iron with zinc coat)
QS 3000W 205 50H Hub Motor, 36 holes, 150mm dropouts, black
18"X1.6" Black moped aluminium wheel rim
In a Radial pattern

2. 1X2 Croos Pattern Wheel Set
36X10G Spoke (Stainless steel)
QS 3000W 205 50H Hub Motor, 36 holes, 150mm dropouts, black
19"X1.6" Black moped aluminium wheel rim
1X2 cross pattern

3. 1X4 Cross Pattern Front Wheel Set
32X10G Spoke (Iron with zinc coat).
Front Hub 32 holes, M20 diameter, 110mm dropouts, black
19"*1.6" black moped aluminium wheel rim
1X4 Cross Pattern
PS. We enlarge the spoke hole of front hub to fit with 10G spoke.

4. 1X2 Cross Pattern Rear Wheel Set
36X10G Spoke (Iron with zinc coat).
QS 3000W 205 50H Hub Motor, 36 holes, 150mm dropouts, black
18"*1.85" black moped aluminium wheel rim
1X2 Cross Pattern
PS. We make it Iron with Zinc coat to match with the front wheel set.


That's all, thank you!

 

[ohzee]

Your images do not seem to be working.

Still great job at communication with the community.

 

[QSMOTOR]

Your images do not seem to be working.
Still great job at communication with the community.

With my pleasure, I will try to upload to another cloud services.
Btw., do you have any suggests?

Best Regards

 

[Stielz]

Google Plus is very good. Upload straight from your phone. When uploading just make sure its shared to public

 

[Doctorbass]

Vito ! My next motor order will be for a QS 205 for sure!!

lol I recommanded these to many friends that bought these but still not have tried any yet! :lol:
I feel these motor will save alot of time! No need for: upgrade phase wires, replace bearings, reglue magnets... etc!

Doc

 

[Mammalian04]

Good to know. I might try a laced set...

 

[QSMOTOR]

Google Plus is very good. Upload straight from your phone. When uploading just make sure its shared to public

Thank you very much for sharing, Google plus is limited in China.
It's quite difficuilt for us to upload pictures.
I shared to public the link of dropbox and jianguogun, could you please kindly check if it works?

Best Regards

 

[Mammalian04]

Yes, Vito. Dropbox photos worked!

 

[Sr.Agaporni]

Your images do not seem to be working.
Still great job at communication with the community.

With my pleasure, I will try to upload to another cloud services.
Btw., do you have any suggests?

Best Regards

Not sure if you are going to sell the front and real wheel set, if so, a double rotor front upgrade would be awesome.

 

[litespeed]

Vito,

I'll be the first to do the 18" rear with 205 V3 and 19" front. Let me know when your ready to go. Are you going to offer the 273 V3 in rims as well?

Tom

 

[fullonoob]

When will the 19" rear 205 V3 combo be ready?

 

[DasDouble]

What motor do you guys recomment me for 3kW - 4kW around +45km/h , 84 volt use? (Shouldn´t be more than 350$ if possible...)

-Cheers, Elias

 

[DasDouble]

Ok I think I took my decicion:The QS 3000W 205 (50H) E-bike Spoke Export/V2 Type Hub Motor -- 2.) Balance Type for 84 volts; 3kW normal, 6kW-Peak; RPM around 650 and 500 and not more than 60km/h.

How much is the price for that? 286$. Is that right?

-Is there any way to get some cheaper shipping costs to germany? $ 131.27 for shipping is a bit tooooo much...

-Cheers, Elias

 

[gensem]

Ok I think I took my decicion:The QS 3000W 205 (50H) E-bike Spoke Export/V2 Type Hub Motor -- 2.) Balance Type for 84 volts; 3kW normal, 6kW-Peak; RPM around 650 and 500 and not more than 60km/h.

How much is the price for that? 286$. Is that right?

-Is there any way to get some cheaper shipping costs to germany? $ 131.27 for shipping is a bit tooooo much...

-Cheers, Elias

Get the V3 Extra type 6t. Hub motor is 280 dollar for the extra type because ES members have a discount. Ask QSMotor for a quotation to know the exact shipping.

http://qsmotor.en.alibaba.com/produ...50H_E_bike_Spoke_Extra_V3_Type_Hub_Motor.html

 

[DasDouble]

Ok I think I took my decicion:The QS 3000W 205 (50H) E-bike Spoke Export/V2 Type Hub Motor -- 2.) Balance Type for 84 volts; 3kW normal, 6kW-Peak; RPM around 650 and 500 and not more than 60km/h.

How much is the price for that? 286$. Is that right?

-Is there any way to get some cheaper shipping costs to germany? $ 131.27 for shipping is a bit tooooo much...

-Cheers, Elias

Get the V3 Extra type 6t. Hub motor is 280 dollar for the extra type because ES members have a discount. Ask QSMotor for a quotation to know the exact shipping.

http://qsmotor.en.alibaba.com/produ...50H_E_bike_Spoke_Extra_V3_Type_Hub_Motor.html

Thanks for this information! Is the V3 version worth it? I don´t need a beast of motor. I want to push "just" 4kW through it. Not more^^ I think the v2 is good enough.. Isn´t it?

 

[DasDouble]

Do you guys sell this The QS 3000W 205 (50H) E-bike Spoke Export/V2 Type Hub Motor -- 2.) Balance Type also alredy mounted in 19" motorcycle rim? If so: How much is the price for: the Motor mounted with rim, shipping costs to germany and taxes for an endless sphere member?


-Cheers, Elias

 

[fullonoob]

yes the extra$$ is worth it for the v3