rogerc
1 W
First a couple questions,
I keep reading where alum frames should not be used in building an ebike, then I read that it is okay for a rear hub with torque arm installed.
I am 6'3 inches 228 lbs and 60 years old. I am mostly building this for fire type roads that have some inclines. Will an alum frame with torque arm installed handle my weight with this type of riding and the motor posted below?
Also, is disc brakes really better or should I settle on the old style v brakes since this appears to be an easier fit.
Still looking for a good bike on Craigslist and will purchase kit from EM3 when I find the right bike. I want an XL frame and there aren't a lot of them out there. Looking for XL Giant or Specialized type bike.
I want this build to do the following:
Not interested in anything over 20mph, more interested in being able to climb hills and run up fire roads that have inclines. Remember I am 60 not 30.
Would like 30 mile range.
3 or 4 levels of peddle assist. I have not been able to find out if this kit has peddle assist or how to set it up.
Would like an easy build.
Now please review my build and give me any recommendation, changes, insight that you may have before I purchase.
Here is the kit I am thinking of ordering:
Upgraded EM3ev vers.
Mac , 500/1000W Pick'n'Mix Kit
- Controller Type 9 fet 30A (36-48V, IRFB3077)
- Motor Speed 255rpm loaded @36V 10T Rear Hub Motor
- Wheel Type 26" Alex DH19 CNC or disc????
- Throttle Type Half Twist
- Ebrakes Yes
Grin Tech Universal Rear Torque arm, Rev. 4
Battery will be the following:
14S 9P, 50V 18.5Ah Samsung SDI Battery Pack uses the SDI ICR18650-22P 3C rated cell combined with their custom EM3ev triangle bag.
ALUMINIUM CASE CHARGER 58.8V 5A,14S LI ION/NCM (WITH SWITCH) I hope this is the right charger.
Cycle Analyst Version 3 or CYCLE ANALYST EBIKE COMPUTER, CA-DPS, VERS.2.3.
Is there anything else I need to order?
I keep reading where alum frames should not be used in building an ebike, then I read that it is okay for a rear hub with torque arm installed.
I am 6'3 inches 228 lbs and 60 years old. I am mostly building this for fire type roads that have some inclines. Will an alum frame with torque arm installed handle my weight with this type of riding and the motor posted below?
Also, is disc brakes really better or should I settle on the old style v brakes since this appears to be an easier fit.
Still looking for a good bike on Craigslist and will purchase kit from EM3 when I find the right bike. I want an XL frame and there aren't a lot of them out there. Looking for XL Giant or Specialized type bike.
I want this build to do the following:
Not interested in anything over 20mph, more interested in being able to climb hills and run up fire roads that have inclines. Remember I am 60 not 30.
Would like 30 mile range.
3 or 4 levels of peddle assist. I have not been able to find out if this kit has peddle assist or how to set it up.
Would like an easy build.
Now please review my build and give me any recommendation, changes, insight that you may have before I purchase.
Here is the kit I am thinking of ordering:
Upgraded EM3ev vers.
Mac , 500/1000W Pick'n'Mix Kit
- Controller Type 9 fet 30A (36-48V, IRFB3077)
- Motor Speed 255rpm loaded @36V 10T Rear Hub Motor
- Wheel Type 26" Alex DH19 CNC or disc????
- Throttle Type Half Twist
- Ebrakes Yes
Grin Tech Universal Rear Torque arm, Rev. 4
Battery will be the following:
14S 9P, 50V 18.5Ah Samsung SDI Battery Pack uses the SDI ICR18650-22P 3C rated cell combined with their custom EM3ev triangle bag.
ALUMINIUM CASE CHARGER 58.8V 5A,14S LI ION/NCM (WITH SWITCH) I hope this is the right charger.
Cycle Analyst Version 3 or CYCLE ANALYST EBIKE COMPUTER, CA-DPS, VERS.2.3.
Is there anything else I need to order?