Schwinn chopper ebike buildup questions

LOL... You'll never guess what's being sold only 30 miles south of where I live...

Yep, you got it...

7592b764.jpg


Going over on Saturday to pick it up..

$130 originally.. Got him down to $100. ;)


P.S. At least you finally got a vid of you riding!
 
You lucky SOB! I been lookin to get one of them, for the battery box, and the front forkes, along with an XL, for nearly a year. Well, I hope it serves you well, that's not a bad price either, considering I'm trying to sell a plain OCC for $100. Here's another vid, this time, it's me practicing for Wolfy! Try to ignore the breathing, the mic on the cam is insane close up.

[youtube]fXFFcKoRDV8[/youtube]

Brian L.
 
Rock On .....Brian .....Rock On :mrgreen:
Just been doin' a lot of lurking last couple days
too paainful to type....must be healing up
still trying to wrap my noodle around the rear axle / trailing arms spread
I remember reading in the forum about a piece that threads onto to axle and allows another threaded round stock to be inserted thus extending length of axle.
To me is a lot like a pipe coupling ......can't find it now though
anybody remem what I am talking about too?
 
Go back through this thread, or just drop the folks at it's electric a line. They are the ones with the axle extensions. And I apologise for not practicing enough, or there wouldn't have been any sour notes.
http://www.itselectric.ca/index.html
Brian L.
 
RallySTX said:
You lucky SOB! I been lookin to get one of them, for the battery box, and the front forkes, along with an XL, for nearly a year. Well, I hope it serves you well..

Brian L.

When I'm done with it, I'll probably have a spare set of forks AND the case for the center is actually in really bad shape.. You would have to sand it down and repaint it..

But when I'm done with it, you can have the forks/battery case just pay for shipping.
 
I wouldn't mind a bit of sanding. Are those forks the ones with the brake attachments? That's why I'm interested. My memory says they have front brakes. As long as the case screws are not stripped, I want it. I just want to fill it up with lipo and mount it to my OCC, and swap in forks with front brakes. Can you measure the distance from the bottom of the forks to the brake mount holes? and tell me if the holes are pointed toward each other or are pointed toward the rear of the bike?
Brian L.
 
RallySTX said:
I wouldn't mind a bit of sanding. Are those forks the ones with the brake attachments? That's why I'm interested. My memory says they have front brakes. As long as the case screws are not stripped, I want it. I just want to fill it up with lipo and mount it to my OCC, and swap in forks with front brakes. Can you measure the distance from the bottom of the forks to the brake mount holes? and tell me if the holes are pointed toward each other or are pointed toward the rear of the bike?
Brian L.

I'll check and I'll take a few shots of the forks.. (They have front brakes.. BUT neither the brake "calipers" or brakes will be on the forks... Only the mounts that are part of the frame.)
I'm at work right now.. I'll do that when I get back home.

Oh and since you posted a vid of a ride, I figured I would too....

Well, I started off, went about 1/2 mile and was about to start taping UNTIL...

[youtube]mCVct5cwdSk[/youtube]

Yep, you guessed it.. LOL.
Johnny wanted to see my bike..
 
Geez, it's getting so a guy can't even park a motorized vehicle on the sidewalk anymore, without risking a ticket from the man! :shock: Ok, skip the forks, I still want the battery box. I'll have the cash for shipping on January 1st.
Brian L.
 
RallySTX said:
Geez, it's getting so a guy can't even park a motorized vehicle on the sidewalk anymore, without risking a ticket from the man! :shock: Ok, skip the forks, I still want the battery box. I'll have the cash for shipping on January 1st.
Brian L.

Oh, I wasn't parked..... He was riding behind me for about 1/4 mile before I finally stopped (There was a garbage truck in front of me, for that 1/4 mile picking up garbage) and I tried to wave him past me (I was riding in the bicycle lane...) and THEN I realized it was "Johnny Law", when he asked me to pull over. Heh.. He must have been pacing me to see what my speed was.. (Thankfully my speed is limited to 20mph... It was even on my bike computer.. MxSpeed 20.0 ;))
 
No ticket, no problem, I always say. If that had been me, he'd a caoght me speedin, or arrived just in time to see my pack spontaniously combust. :oops: Then he'd a ticketed me for an unregistered camp fire! or smoking without a license! :shock: I'm gonna have to try a different setup on my cam, I sem to remember it getting better video quality than I got yesterday.
Brian L.
 
I spoke with the guy..
He said the battery case is missing the Screws that hold it together..
I'll have to see if the local home depot has those types of screws..
Do you need any of the buttons on it? (e.g, on/off switch, fuse holder, "PC" connector, etc).. The reason I ask is, that I usually re-purpose those for other things, but if you NEED them, I'll leave them on.

Frank
 
Nah, you don't have to worry about it. Keep me in the loop if you get it, and you think the box is salvageable. I have pretty much everything but batteries, boxes, and bits from the shop. You got me watering from the mouth about finding a chrome rear fender off an OCC to use on the Spoiler for ease of maintenance. I even decided to look into getting a springer front end for the OCC as well. Mabye I can slow down the twitchy high speed manners and make a decent cruiser out of the Stripper. :shock:
Brian L.
 
Just a tiny bit more "eye candy" for you..

[youtube]Exo0UxkoFk0[/youtube]

Yeah, yeah, I know.. LOL. ;)

Edit: Almost forgot!

(It comes with this...)

9539f286.jpg
 
You need a CB radio, police scanner and radar detector sangesf, another few SLAs too run it would be the shot, perhaps perch them in that 'lovely' manly front basket you have there? :p :mrgreen: :lol:
SoOOOoo... I'm guessing your not a fan of MP3 players and a set of headphones then?! :mrgreen:

KiM

p.s Last EP season 4 Sons of Anarchy airs TOMORROW 3am on FX RallyMaN..shall try to have season 3&4 ripped and in the mail by the weekend for you;)
 
:mrgreen:
AussieJester said:
You need a CB radio, police scanner and radar detector sangesf, another few SLAs too run it would be the shot, perhaps perch them in that 'lovely' manly front basket you have there? :p :mrgreen: :lol:
SoOOOoo... I'm guessing your not a fan of MP3 players and a set of headphones then?! :mrgreen:
KiM

p.s Last EP season 4 Sons of Anarchy airs TOMORROW 3am on FX RallyMaN..shall try to have season 3&4 ripped and in the mail by the weekend for you;)

CB Radio.. Check (already have one, just haven't hooked it up yet.. (also has a PA function on it and I have the PA speaker))

Police Scanner? LOL.. What for?!?

Radar Detector? I only have a top speed of 20 mph. Heh.

I already have a 12v 60AH (Lifepo4) Battery setup for my lights, directionals, radio, speakers, SUB (w/neon lights that blink to the music), brake lights, CB, 400w DC/AC inverter, etc.

Oh I also use that battery and the inverter (plus a 36v 2a brick charger) for an "emergency charging system" for my "driver batteries"!

Riding a bicycle with headphones on, in Florida, is illegal..
The radio takes my iPhone connection, USB Flash Drive and an SD Card!

P.S. Oh and with a name like Kim, If I were you, I wouldn't be calling anything I have "girly"...
(Something about a pot, a kettle, and the color black, comes to mind)
:shock: :| :shock:

LOL
 
Kim, LMAO! Yeah they're kids bikes, but they're way strong. The short wheelbase, cheap parts, and lack of suspension kill the buzz for me. :? I'm lookin at adding Springer forks from Choppers.us to slow down the steering, and soften the blows. :D Trouble is, that's a $500 upgrade, on a 50 cent budget! :lol: The Rock Shox style does nothing for me. I like the CB, but I'm a ham so I'd have some VHF/UHF stuff under the lid. A weather radio, and an Eperb for remote spots. Mainly, I just want to finish one of these, so I can get some seat time in. :shock: Spent some time on the tele with Ice, and cleared up an issue with the harness. Today was video Monday, but the weather threatened snow, so I chickened out. :oops: This vid will be longer, but at a lower resolution, to try and stabilise the picture. Still chewing on the battery box bone. :? Someone mentioned tower standoffs but I can't find the links now. :shock: Cheers!
Brian L.
 
RallySTX said:
Kim, LMAO! Yeah they're kids bikes, but they're way strong.

Kids bikes yes, if you only knew how thin the mild steel tubing was that these things are made from
i dont think you would be calling them 'strong' either...I would be worried about internal
rust too, the two i cut apart were rusting away from the inside, you can buy spray specifically
for the inside of bicycle frame tubes, i would suggest you get some if you don't want your frame rusting away.

KiM
 
Really? Thin crap huh? Well, all I want to do is test the parts before use on the Spoiler. You are invited to share what you think of that one too! Do you think I should drop the Schwinns and try something better? What do you have in mind?
Brian L.
 
I don't know about the "other" Schwinn OCC bikes, but the Electric ones I buy and use are quite durable... Just like any kind of steel, if you leave them outside (especially in warm, humid weather), they will rust rather quickly.
That's why I make sure to bring in my bike any time it's raining or warm/humid.. Learned that after the very first one I bought, I left outside for a month before I started working on it and it was rusted quite a bit. With steel framed (low-carbon) bicycles, keeping them away from inclement weather is always a good idea..
Plus, keeping it clean helps too!

Aluminum is even less durable, but doesn't rust, but it does "oxidize"..
The chrome is even less rust resistant than steel, but oh.. It's oh so "pretty"!
 
Update, just in time for Xmas, I donated the Runt to The Salvation Army's Childrens gift drive.
PHOT0004-2.jpg

Some young person will be very happy with it. After going to the doctor for a regular drug renewal, I was diagnosed with a huge clot in my right leg. So, I had to spend three days in the hospital. The food was ok, it's the bed that killed me! After a week of daily walking, and nonstop Advil doses, I can finally say it's better. I was wel enough today to walk the bike down to the SA, and bring back some milk. Also today, Ice's harness for my Spoiler arrived! All I need now is barreries, boxes, and a few more parts from the Machinist, and I can ride! Thank you Ice, and Seasons Greetings to all!
Brian L.
 
Sweet dude!!! That's mighty nice of you..
Just an update... Added an 8" sub to my stereo.. It rocks!!
LOL.
Happy holidays!
 
If I had put that much effort into sound reenforcement into my bike, It would be self propelled via the noise level alone! :shock: :lol: That's gotta sound nice though. Now I'm trying to control a ginormous headache from the drugs they gave me. Had to go in today and ask them to take me of one to see if it helped stop the nonstop headache.
Merry Christmas all!
Brian L.
 
Happy New Year! Here's an update with bite in it. Today I made the final payment on some freshly cut 7075 alloy that will secure the Spoiler's rear axle, and mount the rear brake calipers on both bikes! And for less than what most shops would charge to draw up the sheetwork. Teaser pics of the newly complete Spoiler 4Sx5P harness, Thanks Ice! [and my Christmas present!] the 12MP Powershot 100HS. Finally, I can take a decent pic! I can't wait to mount it to a bike and let it run.

SPharness.jpg


Canon.jpg


Here's a link to a bar mount for cams.

http://www.ebay.com/itm/MOTORCYCLE-CAMERA-MOUNT-KIT-/260934481405?pt=Motorcycles_Parts_Accessories&vxp=mtr&hash=item3cc0e835fd

See YA!
Brian L.
 
eeek :shock: :shock:
Thats some lotta lippo harness Brian. You gonna be powering a fleet of bikes with that lot :wink:
Nice camera mount link buddy, I may get one of these at a later date.

My latest purchase for the bike is...

ELECTRIC BIKE LEFT GRIP CONTROL.
$(KGrHqUOKnQE5JRmd157BOY6VFkPy!~~60_32.JPG

plus my mate is going to order me up a super duper new motor. Fingers crossed that they still have them in stock.

Regards
Tom
 
Back
Top