Small High Current Alligators?
- Thread starter rg12
- Start date
DogDipstick
100 kW
Bahahaha
This wat u lookin 4?
They been around for a long timez Lolz.
" BED OF NAILS CLIPS"
-0r-
"Single Spike"
Your choice .
https://www.google.com/search?client=firefox-b-1-d&q=BED+of+nails+clip+cable+set
https://www.amazon.com/s?k=BED+of+NAILs+clips&i=tools&ref=nb_sb_noss_2
Not very obvious search terms, Eh? lol...... Screw Google IMO. Ask first. Google later.
If they dont suit you, look toward tig welding clams. They come in med-high current, all sizes. Easy plugin and unplug.
This wat u lookin 4?
They been around for a long timez Lolz.
" BED OF NAILS CLIPS"
-0r-
"Single Spike"
Your choice .
https://www.google.com/search?client=firefox-b-1-d&q=BED+of+nails+clip+cable+set
https://www.amazon.com/s?k=BED+of+NAILs+clips&i=tools&ref=nb_sb_noss_2
Not very obvious search terms, Eh? lol...... Screw Google IMO. Ask first. Google later.
If they dont suit you, look toward tig welding clams. They come in med-high current, all sizes. Easy plugin and unplug.
e-beach
10 MW
Unfortunately, current is current and mass is mass and small connectors just won't carry large current.
Although, I suppose I should ask just how high a current you are thinking about first?
How much amperage can a bed-of-nails 17awg carry....8 amps?
My first thought is to connect two pieces of 10 awg solid core wire to an existing alligator clip. File the inside contact points flat and use it like a 10 awg clip.
Although, I suppose I should ask just how high a current you are thinking about first?
How much amperage can a bed-of-nails 17awg carry....8 amps?
My first thought is to connect two pieces of 10 awg solid core wire to an existing alligator clip. File the inside contact points flat and use it like a 10 awg clip.
Still won't work as it's hollow, it's like a dog's mouth haha, you will get a bit more area but still super thin.
I think I've seen some rectangular ones somewhere that had those thin close lines as the rigid area and the whole area was touching and not just the sides.
Even in car jumper cables they barely touch with 4 teeth, it's horrible...
I think I've seen some rectangular ones somewhere that had those thin close lines as the rigid area and the whole area was touching and not just the sides.
Even in car jumper cables they barely touch with 4 teeth, it's horrible...
markz
100 TW
https://www.be-electronics.com/category_s/2310.htm
https://www.be-electronics.com/product_p/bu-21cps.htm
more details on physical size here - https://www.accessotronik.com/product_p/bu-21cps_m285.htm
https://www.be-electronics.com/product_p/bu-21cps.htm
more details on physical size here - https://www.accessotronik.com/product_p/bu-21cps_m285.htm
torker
100 kW
300AMP COPPER WELDING GROUND CLAMP by LENCO https://www.amazon.com/dp/B008VFWCFW/ref=cm_sw_r_cp_apa_i_nvmsEbTJMHV2S
Here you go.
Here you go.