Hello again everyone! So I decided against buying that used Biktrix pack and ended up having one custom built for me by the folks over at http://affordableebikes.ca
The specs on the pack:
52v 19Ah Samsung INR18650GG cells all brand new and voltage matched prior to assembly
The BMS is a dumb 40a 14s Daly module, the balance detection voltage is 4.18v and if my math is right the cells are stopping their charge at 4.17v...
It stops charging at 58.4 volts rather than 58.8...
Is there anyway short of opening the pack and manually balance charging to get the cells to charge that extra 0.01v so balancing gets triggered?
The specs on the pack:
52v 19Ah Samsung INR18650GG cells all brand new and voltage matched prior to assembly
The BMS is a dumb 40a 14s Daly module, the balance detection voltage is 4.18v and if my math is right the cells are stopping their charge at 4.17v...
It stops charging at 58.4 volts rather than 58.8...
Is there anyway short of opening the pack and manually balance charging to get the cells to charge that extra 0.01v so balancing gets triggered?