johnrobholmes
10 MW
Whaddaya do, put the steel in a vice and angle grind it to submission?
johnrobholmes said:Whaddaya do, put the steel in a vice and angle grind it to submission?
AussieJester said:Hyena, i stuck it in 3rd today found a BIG mofo hill and hit 76km/hr..these toy
motors plus gravity work wonders hehe
Hyena said:Do you reckon the plate that bolts to the bike and supports the curved rods will be strong enough ? It looks like there'd be a fair bit of leverage on that point with the weight of the rods + the bouncing of the wheelchair at speed...
edit: never mind, I'm blind and stupid. I just realised the rod bent over the top and the bits you've made in the last few shots will be welded to the top curved bit then bolted to the axle
Malcolm said:Kim: Just a bit off topic, I know, but on the subject of phantom pain I found this video fascinating: http://www.ted.com/talks/vilayanur_ramachandran_on_your_mind.html
rkosiorek said:need to renew the perscription. but what do i do until the pharmacies open in the morning? it is 3am here.
Kim - ain't it a bitch when someone trying to be kind says something stupid like "I can feel your pain"? i know for a fact that there is no way that i can feel what you are feeling. somewhat relate to it maybe. but feel it?
zenon said:Oh I see speed sign on the video , and I thought I was the only one that ignores it :wink:
Hyena said:Why didn't you weld your tow hitch support bars directly to the frame ? Are you planning on removing it when you're not towing the chair ?
Hyena said:Your school zones are only 20km/hr there ?? Ours are 40 over this way. :
1000w said:Hyena said:Your school zones are only 20km/hr there ?? Ours are 40 over this way. :
Ours are 40kmh too, Kim is just going too fast to read the signs or had too much weed.
Cheers,
Matt.
enoob said:Hyena id be willing to bet he can reach around (hee hee) and uhook/grab the chair while seated on the bike.
nicobie said:I'll bet you make them crap their stretchy little pants when they hear that motor coming up behind them wailing at 12K rpm.