velocifero mad 1600w and Votol-em305

[Maverick440]

Hi, I'm new to this forum and have a Velocifero mad 1600w 2020my with hub drive.
The ESC is a Votol em-305 and I would like to know if its possible to disable the speed limiter and If so how do I do it.
Thanks

Mark

 

[larsb]

You’d need a programming cable and program.
Cable can be bought from QS motor or built from a pl2303 serial adapter with a 4 pin connector.

Program is in the votol controller thread. Just google it here and you’ll find it. There are some risks as you don’t know which program/hardware match you need - you might kill the controller.