What is Mac 8T motor wiring to Lyen 12-fet 3077 controller?

nukezero

10 kW
Joined
Jul 2, 2013
Messages
560
Location
Los Angeles, CA
Hi guys

I want to know what is the wiring to get Lyen's 12-FET 3077 Mark 2 controller mated to Em3Ev (Paul's) Mac 8T upgraded motor kit?

Paul and Lyen are both suggesting two different things and I'm wondering who's right. Perhaps someone here already tried and can help me confirm.

Paul is telling me I need to just swap Yellow and Blue wires on the Hall and Phase wires. But Lyen is telling me that I need to swap Yellow and Green on Hall and Phase Wires instead.

Before I plug it in and blow it up, who's got the right answer?

Thanks a bunch.
 
nukezero said:
Hi guys

I want to know what is the wiring to get Lyen's 12-FET 3077 Mark 2 controller mated to Em3Ev (Paul's) Mac 8T upgraded motor kit?

Paul and Lyen are both suggesting two different things and I'm wondering who's right. Perhaps someone here already tried and can help me confirm.

Paul is telling me I need to just swap Yellow and Blue wires on the Hall and Phase wires. But Lyen is telling me that I need to swap Yellow and Green on Hall and Phase Wires instead.

Before I plug it in and blow it up, who's got the right answer?

Thanks a bunch.


FWIW, my last MAC 8T and Lyen 4110 12FET matched up color for color. Which also matched up to an older crystalyte controller just fine too. Crazy thing is that the old Xlyte controller pushes the motor faster than the Lyen actually. I think I need to check the settings.
 
Thanks for anyone that's interested, it's confirmed.

Swap on the Hall and Phase wires. Everything else is matched.

Green to Yellow
Yellow to Green


I hit a solid 31mph last night, no hiccups or jerks. But the torque is a bit less than I'm used to, coming from the Bafang BPM 500. I think it's because I set the current at 20A max on 48v. I need to jack it up to 30A.
 
nukezero said:
Thanks for anyone that's interested, it's confirmed.

Swap on the Hall and Phase wires. Everything else is matched.

Green to Yellow
Yellow to Green


I hit a solid 31mph last night, no hiccups or jerks. But the torque is a bit less than I'm used to, coming from the Bafang BPM 500. I think it's because I set the current at 20A max on 48v. I need to jack it up to 30A.

20A limit is definitely your reason for less torque feel if you're hitting 31mph. 30A will be a nice kick
 
cal3thousand said:
nukezero said:
Thanks for anyone that's interested, it's confirmed.

Swap on the Hall and Phase wires. Everything else is matched.

Green to Yellow
Yellow to Green


I hit a solid 31mph last night, no hiccups or jerks. But the torque is a bit less than I'm used to, coming from the Bafang BPM 500. I think it's because I set the current at 20A max on 48v. I need to jack it up to 30A.

20A limit is definitely your reason for less torque feel if you're hitting 31mph. 30A will be a nice kick

yeah, it was a dog getting off the line. Like I was on 36V battery or something. But once it got going >20mph, I could definitely feel it had more "horsepower" to pull me up to 30mph than the bafang bpm.
 
Back
Top