Search results

Date Relevance Most replies

  1. M

    Meanwell Q5 fan mod not working

    Hello everyone, I tried to fan mod my two meanwell s-350-48V acording to NeilP's instructions by shorting two of the pins on the Q5 transistor to force the cooling fan to stay on. Photo from auraslip's website: I soldered two wires to the pins so that I could attach them to a switch on the...
  2. M

    Quick CA question

    Hi all, I calibrated my CA-DP by running a known current through the shunt and adjusting the shunt resistance in the CA setup menu until the CA was showing the correct current. However, the current was provided by 82V meanwells to which the CA was not hooked up. The CA was provided power from a...
  3. M

    GM1000W on 20s lipo "re-build" thread

    Hello everyone, So for the past month and a half I've been reading about how to increase the top speed of my bike and things are finally starting to piece together. I've been meaning to start a "re-build" thread for a long time but have been too lazy. I finally have some time to do a write-up...
  4. M

    What wire and connectors should I get?

    I know this is probably discussed to death somewhere but it's almost impossible to find a thread on wires and connectors that gives me the info I need by searching those keywords as they show up in almost every thread. So I was hoping you guys would be able to help me out on choosing what kind...
  5. M

    Cheapest lipo right now?

    Anyone know what the cheapest lipo is right now? I've been waiting for HK to get the 4s hardcase in stock but I'm getting impatient :evil: I'm thinking about getting 6 of these to run 18s2p: http://www.hobbyking.com/hobbyking/store/__7639__ZIPPY_Flightmax_5000mAh_6S1P_15C_.html They seem to...
  6. M

    Noob needs help upgrading bike

    Hi everyone! So I built my first ebike a little over a year ago and I want more speed out of it now. Right now I'm running a rear 1000W 48V 26" Golden Motor hub with the standard GM cruise controller and their 48V 12ah lithium battery. I have done a lot of reading and I still have a few...
  7. M

    I want to build a cyclone powered bike

    Hello everyone! Last year I decided to buy a Golden Motor 1000W rear hub motor kit. My goal was to build a bike that was fast and stealthy (not able to tell it's electric). So far the bike has served me well, but my concern is that since the dropouts are aluminum, I won't go past half throttle...
  8. M

    Do's and don't of installing a torque arm?

    Hi everyone, this is my first post on here. I have built an ebike a couple of months ago and it has been serving me well. It is an aluminum bike I bought at Costco years ago and I installed a GoldenMotor 1000W 48V rear hub motor on it. So far the bike has been serving me well, but I want to...
Back
Top