CA3 Throttle Voltages

[Matthew]

Hi, I've managed to mess up my throttle input/output voltages, and I was wondering if anyone knew the idea (or which direction I want to change the voltage to find it), or at least the default.
If it makes any difference, I'm using a EM3ev Upgrade MAC kit with 9fet infinion controller.

Thanks, Matthew

 

[teklektik]

Throttle settings are build-specific and must be tweaked in for best operation....

1. Download the most recent Setup Parameter doc and print it.
2. Go through ALL the Setup screens and record all you present settings. Save this doc.
3. The problem is that you do not have true factory defaults which are assumed in the normal setup procedure (since Paul has already configured stuff for you). So sort of faking it:
   • Download the Unofficial Guide + Errata.
   • Follow the steps in section 3.5 to deactivate all the advanced stuff.
   • Set ThrI->CntrlMode=PassThru.
   • Follow the steps in sections 3.6 and 3.7.
4. Using the saved doc above, restore ALL settings except your new throttle min/max/fault settings. This should re-enable any advanced features and restore the original throttle mode that Paul provided.
5. Update the doc with your new throttle settings and save it so you can undo any future configuration devilment.