Dear Members,
Apologies if this has been discussed already.
I'm about to build an e-scooter using a beautiful Crussis Road 4.2-2 scooter.
I want to use the Bafang 700CC 250W, 36V front hub KIT which has a KT-LCD3 display. (I used this kit with rear hub motor in one of my bikes).
The question is that can I still use the throtller if I don't connect the PAS sensor since the scooter has not pedals. I know I can program the controller through the display to use throttle only (this is how I used on my bike) - but not sure if I keep the PAS connection cable unconnected will work or not.
Thanks,
Bela Nagy from Hungary.
Apologies if this has been discussed already.
I'm about to build an e-scooter using a beautiful Crussis Road 4.2-2 scooter.
I want to use the Bafang 700CC 250W, 36V front hub KIT which has a KT-LCD3 display. (I used this kit with rear hub motor in one of my bikes).
The question is that can I still use the throtller if I don't connect the PAS sensor since the scooter has not pedals. I know I can program the controller through the display to use throttle only (this is how I used on my bike) - but not sure if I keep the PAS connection cable unconnected will work or not.
Thanks,
Bela Nagy from Hungary.