Cycle Analyst Direct Plug in Model Suited to Ezee Torq Gen 2

[djcharliek]

Hi everyone,

I've been having a look on the forum for quite some time now. I finally bit the bullet and purchased an Ezee Torq MkII bike. I'm from Melbourne, Australia.

Bike is running the 36V 20AH which gives me plenty of range which is good as there are some hills on my way to work. It's good for my 34km round trip to work. Best of all, I don't have to charge my battery at home during the working week.

Just wondering if anyone knows if the direct plug in model of the Cycle Analyst will directly plug into the Ezee controller on my bike? If not, I think I will save the CA to be installed on another bike when I convert it.

Thanks all

 

[amberwolf]

If your controller has the CA connector installed on it, then yes. You can check with the manufacturer of the bike to find that out, if you can't tell by looking at the controller's wiring harness, for a 6-pin JST-SM connector.



Otherwise, you can simply get the DP version of the CA, but also purchase the add-on Standalone shunt and speed sensor to use on your present bike. Or if the current versions of the SA model of CA contain those as removable items, you can get that instead. Then later if you upgrade to a new bike you can move the CA to that one, whether or not it has the CA connector on it's controller.