thomasjgallant
1 mW
- Joined
- Sep 21, 2022
- Messages
- 19
Hello, I have an ebike that was built with a sabvaton controller which failed after 60 miles. I sourced a Nucular 24f controller from this site and installed it but I have been unable to get it configured properly. I was able to get the auto setup to find the motor, correct the angles, but had to reverse the motor direction. I have never been able to have it find the brake or throttle, throttle was working once but in the onboard PC still showed and error. It sort of worked meaning it sent a very limited amount of current to the motor and it turned when the throttle was turned but not enough to move the bike forward.
To program from beginning, the controller, battery, firmware, etc... Is beyond my talents and patience. I am willing to pay someone local to assist me, I would pay up to $100 an hour to sort everything out and get it running properly. Everything is brand new and worked previously I'm sure its just a matter of configuration.
Here are the specs:
QS273 3T
72v 70ah 200a battery (have the exact specs peak current phase etc.)
Nucular24f controller
Please let me know if you are in the SD area and are willing to network with me, again I am absolutely willing to pay cash for successful technical help.
Thanks in advance!
To program from beginning, the controller, battery, firmware, etc... Is beyond my talents and patience. I am willing to pay someone local to assist me, I would pay up to $100 an hour to sort everything out and get it running properly. Everything is brand new and worked previously I'm sure its just a matter of configuration.
Here are the specs:
QS273 3T
72v 70ah 200a battery (have the exact specs peak current phase etc.)
Nucular24f controller
Please let me know if you are in the SD area and are willing to network with me, again I am absolutely willing to pay cash for successful technical help.
Thanks in advance!
Attachments
Last edited: