pleasehelpme837
1 µW
- Joined
- Mar 2, 2022
- Messages
- 3
So I just bought a kit, put everything together and the rear motor was going backwards, I then changed the 3 fat wires that are blue green yellow around and it was going forwards, however as soon as I sit on the bike, which is a 1500w 48v 20ah, it has absolutely no acceleration and barely gets going.
I have yet to mess around with the hall sensor wires as they're harder but I have done these variations of phase wires
GreenBlue
YellowGreen
BlueYellow
(This spins the wheel forwards but has 0 torque or acceleration)
YB
BG
GY
(Goes forward no acceleration)
YB
GY
BG
(goes forward no acceleration)
GG
YY
BB
(goes backwards)
YG
GY
BB
(wants to go backwards but just stops and growls)
Please somebody help me with fixing this!
I have yet to mess around with the hall sensor wires as they're harder but I have done these variations of phase wires
GreenBlue
YellowGreen
BlueYellow
(This spins the wheel forwards but has 0 torque or acceleration)
YB
BG
GY
(Goes forward no acceleration)
YB
GY
BG
(goes forward no acceleration)
GG
YY
BB
(goes backwards)
YG
GY
BB
(wants to go backwards but just stops and growls)
Please somebody help me with fixing this!