Hello Team PLEASE PLEASE HELP I'VE GOT QS 273 v3 hub motor around 8K.W and SVMC-96120 Controller

[superbike1]

guys what did you find about this 3-wire connector (red, brown, black) for the 0-5V brake ???


I also have the controller with a 3-wire connector (red, brown, black) for the 0-5V brake but when I connect a 5V thumb throttle, nothing! This is whether I have all brake options enabled in the software and apply my (12V, purple wire) brakes before using the thumb throttle.
I have my thumb throttle wires (red black white) connected to (red black brown) in that order but not sure if that's right or I could hurt anything by connecting a 5V throttle wrong, I'm guessing not!
Any help appreciated!

 

[minde28383]

Hi,

guys what did you find about this 3-wire connector (red, brown, black) for the 0-5V brake ???

What do you mean what we find. This is connector for electric brake. Use it to stop your ebike.

I also have the controller with a 3-wire connector (red, brown, black) for the 0-5V brake but when I connect a 5V thumb throttle, nothing! This is whether I have all brake options enabled in the software and apply my (12V, purple wire) brakes before using the thumb throttle.

When you say nothing happenes when you connect second throttle to be used as ebrake. Have you done all steps in manual.
Just experiment little bit in your softwre, enable disable one brake option leaving another ON etc.

I have my thumb throttle wires (red black white) connected to (red black brown) in that order but not sure if that's right or I could hurt anything by connecting a 5V throttle wrong, I'm guessing not!
Any help appreciated!

If you connect red to red and black to black and rest color is what ever then you won't hut anything.

 

[superbike1]

Hello Team PLEASE PLEASE HELP I'VE GOT QS 273 v3 hub motor around 8K.W and SVMC-96120 Controller WITH 96v 100amp BATTERY I need to increase all possible acceleration boost all possible power in that hub-motor through the MQCON app that way it can do burn out please, and also to increase the highest speed is possible please let me know !!!!

 

[john61ct]

My understanding is the 96120 controller barely scratches the surface of getting even half to possible power out of the 273.

For top speed it's voltage, dunno how high you could go.

But for acceleration, hill climbing, carrying heavy loads it's all about AMPs - you need a much stronger controller to push **phase** amps lots higher at lower rpm.

And heat shedding is the limiting factor, when you say you want to burn it out, be careful what you wish for.

Nucular 24?

does Sabvoton go much bigger?

Sevcon does but hard to find someone can tune those, same with ASI BAC.

Mobipus 72600 will give you 600 Amps, water cooled

 

[superbike1]

well guys where in the settings I can adjust all of way to the limits I use my laptop with usb to plug it in my controller where is and what is the the functions or maybe it is in motor throttler or maybe some current I have to race up in my controller ??????

 

[john61ct]

You need to figure some basic things out first.

Read existing threads, google using keywords, learn the right language

to be able to ask coherent specific questions.

 

[superbike1]

Hello Team PLEASE PLEASE HELP I'VE GOT QS 273 v3 hub motor around 8K.W and SVMC-96120 Controller WITH 96v 100amp BATTERY I need to increase all possible acceleration boost all possible power in my hub-motor through the MQCON app that way it can do burn out please, and also to increase the highest speed is possible please let me know !!!!

 

[superbike1]

Hello Team PLEASE PLEASE HELP I'VE GOT QS 273 v3 hub motor around 8K.W and SVMC-96120 Controller WITH 96v 100amp BATTERY I need to increase all possible acceleration boost all possible power in that hub-motor through the MQCON app that way it can do burn out please, and also to increase the highest speed is possible please let me know !!!!

 

[st35326]

Hello Team PLEASE PLEASE HELP I'VE GOT QS 273 v3 hub motor around 8K.W and SVMC-96120 Controller WITH 96v 100amp BATTERY I need to increase all possible acceleration boost all possible power in that hub-motor through the MQCON app that way it can do burn out please, and also to increase the highest speed is possible please let me know !!!!

Keep turning your phase amps up until the tire spins or the magic smoke comes out of you battery pack.

I think the initial standing throttle hit and ramp rate on Sabvotons is too conservative to spin a tire unless you transfer all your weight to the front of the bike.

 

[superbike1]

by st35326 » Apr 08 2020 5:38pm

superbike1 wrote: ↑Apr 08 2020 5:27pm
Hello Team PLEASE PLEASE HELP I'VE GOT QS 273 v3 hub motor around 8K.W and SVMC-96120 Controller WITH 96v 100amp BATTERY I need to increase all possible acceleration boost all possible power in that hub-motor through the MQCON app that way it can do burn out please, and also to increase the highest speed is possible please let me know !!!!
Keep turning your phase amps up until the tire spins or the magic smoke comes out of you battery pack.

I think the initial standing throttle hit and ramp rate on Sabvotons is too conservative to spin a tire unless you transfer all your weight to the front of the bike.


Thank you man we are getting closer and closer now where exactly I pump my current up in what place I mean in MQCON App when I hook my laptop from usb to the controller and then where is that magic options to race it up??

 

[superbike1]

Thank you man we are getting closer and closer now where exactly I pump my current up in what place I mean in MQCON App when I hook my laptop from usb to the controller and then where is that magic options to race it up??

 

[superbike1]

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China
by st35326 » Apr 08 2020 5:38pm

superbike1 wrote: ↑Apr 08 2020 5:27pm
Hello Team PLEASE PLEASE HELP I'VE GOT QS 273 v3 hub motor around 8K.W and SVMC-96120 Controller WITH 96v 100amp BATTERY I need to increase all possible acceleration boost all possible power in that hub-motor through the MQCON app that way it can do burn out please, and also to increase the highest speed is possible please let me know !!!!
Keep turning your phase amps up until the tire spins or the magic smoke comes out of you battery pack.

I think the initial standing throttle hit and ramp rate on Sabvotons is too conservative to spin a tire unless you transfer all your weight to the front of the bike.

Thank you man we are getting closer and closer now where exactly I pump my current up in what place I mean in MQCON App when I hook my laptop from usb to the controller and then where is that magic options to race it up??

 

[superbike1]

Re: Hello Team PLEASE PLEASE HELP I'VE GOT QS 273 v3 hub motor around 8K.W and SVMC-96120 Controller
by superbike1 » Apr 10 2020 8:27pm

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China
by st35326 » Apr 08 2020 5:38pm

superbike1 wrote: ↑Apr 08 2020 5:27pm
Hello Team PLEASE PLEASE HELP I'VE GOT QS 273 v3 hub motor around 8K.W and SVMC-96120 Controller WITH 96v 100amp BATTERY I need to increase all possible acceleration boost all possible power in that hub-motor through the MQCON app that way it can do burn out please, and also to increase the highest speed is possible please let me know !!!!
Keep turning your phase amps up until the tire spins or the magic smoke comes out of you battery pack.

I think the initial standing throttle hit and ramp rate on Sabvotons is too conservative to spin a tire unless you transfer all your weight to the front of the bike.
======================================
Thank you man we are getting closer and closer now where exactly I pump my current up in what place I mean in MQCON App when I hook my laptop from usb to the controller and then where is that magic options to race it up??

Help =============================

 

[amberwolf]

instead of just repeating yourself asking questions that don't have an answer, why not try detailing, in an easy to read list, exactly what you want your bike to do, and exactly what you have, exactly how it is wired up, and exactly what challenges you face in doing what you want.

then people will have a reference to guide them in assisting you.

you have to help us help you.

 

[Jonno]

Basically your controller and battery are not big enough for your requirements.
You need at least 300 battery amps burst and a 500+ phase amp controller to suit.

Edit:

I've just tried mine @ 100 battery amps and 300 phase amps - although it's quite good it lacks in power somewhat.


Jonno