melonfrog5
1 mW
- Joined
- Mar 28, 2016
- Messages
- 17
Hey guys im new to ES but ive done a bit of browsing for the past hour or so.
I have generated a part list and i would like some advice or anything that might help me make my first board.
found more parts. I have decided that i will 3d print some of my mechanical parts.
ESC
http://www.banggood.com/FVT-CBWI120A-ES ... 85970.html
Motor
http://www.hobbyking.co.uk/hobbyking/st ... Motor.html
Batteries (Not sure if 40C is compatiable)
http://www.amazon.co.uk/Bias-5000mAh-11 ... lipo+11.1v
Kegels
https://www.skatehut.co.uk/brands/orang ... 0wodXGUB5A
Not sure what controller to get. I like the idea of using a Wii Nunchuck as a controller but i am not sure if anyone sells any or if anyone has an tutorial.
What decks are recommended
I currrently have a Comet Grease Shark
https://www.muirskate.com/longboard/com ... m-complete
It is pretty wide and sturdy with little flex and a pretty good clearance
I have generated a part list and i would like some advice or anything that might help me make my first board.
found more parts. I have decided that i will 3d print some of my mechanical parts.
ESC
http://www.banggood.com/FVT-CBWI120A-ES ... 85970.html
Motor
http://www.hobbyking.co.uk/hobbyking/st ... Motor.html
Batteries (Not sure if 40C is compatiable)
http://www.amazon.co.uk/Bias-5000mAh-11 ... lipo+11.1v
Kegels
https://www.skatehut.co.uk/brands/orang ... 0wodXGUB5A
Not sure what controller to get. I like the idea of using a Wii Nunchuck as a controller but i am not sure if anyone sells any or if anyone has an tutorial.
What decks are recommended
I currrently have a Comet Grease Shark
https://www.muirskate.com/longboard/com ... m-complete
It is pretty wide and sturdy with little flex and a pretty good clearance