steveo
100 kW
some updates on my experience with the adaptto's
installed the bms in my dual adaptto hub monster ebike, I re balanced the 7p24s 2.3ah A123 M1A cells pack.
I moved the LVC to 60v or 2.5v a cell (i will probably lower this to 2v since i have a good working bms to monitor)
I removed the acceleration limiter in boost mode to enable full power.
this bike hauls some serious ass, I'm seeing 200 amp peak per controller finally, bursting at 30kw.. both controllers are bone stock with latest firmware (i don't remember which specifically)
This battery should sustain 500 amp continuous no problem, if i unlock both controllers i will get up to 40kw based on my experience with modifying the Adaptto controllers.
For now, i'm very happy with things, next thing will be motor cooling!
-steveo
installed the bms in my dual adaptto hub monster ebike, I re balanced the 7p24s 2.3ah A123 M1A cells pack.
I moved the LVC to 60v or 2.5v a cell (i will probably lower this to 2v since i have a good working bms to monitor)
I removed the acceleration limiter in boost mode to enable full power.
this bike hauls some serious ass, I'm seeing 200 amp peak per controller finally, bursting at 30kw.. both controllers are bone stock with latest firmware (i don't remember which specifically)
This battery should sustain 500 amp continuous no problem, if i unlock both controllers i will get up to 40kw based on my experience with modifying the Adaptto controllers.
For now, i'm very happy with things, next thing will be motor cooling!
-steveo
