New charger...

[esoria]

Hallo boys, i want share the new charging station, i try to create very powerful and good looking charger, and i think....why not like a picture hanging?
This charger is capable of 0-140 Volts and 0-20 Ampere, 2800W
I charge alot of time and alot of pack continous, and the temperature of power supply, dont go over 40C, very very powerful powersupply!!
I put a CA for monitoring power, cycle count, and total amps history.
Enjoy )
https://www.facebook.com/media/set/?set=a.707169255976870.1073741837.706636119363517&type=1

 

[gensem]

Can you give us more details? Or do you plan to sell it assembled?

 

[esoria]

My plan is to sell assembled, or sell single modules, i found this power supply after test alot of chinese not expansive power supply, and after many bad experience with poor quality, this is very very interesting unit.
Most interesting things is real possiblities to set each module from 0-28V, and one of this is capable of 0-30A settings without shunt-mod, resistor mod ecc, i know some meanwell is capable of this settings, but not at 30A end not at this price!
I pay for the 0-28V and 0-30A module 95€ +o-
I can sell single module, or complete charging station, in this charging station only the big module is capable of settings amps from 0-30, and i use this for control current surge from other supply in series.
The other supply in series is capable of 22A max, and i put at 20A, sure if people have more power in house, is possible to take more 0-30A unit and make very very powerful charger 4200W!!!! )
I set this prototype at 2300W, because i charge my lipo pack at 115V-20A, and because i have only 3kw at home
I love the possibilieties of charge my 16amp pack in 40 minute, or when i need some km more i connect my bike only for 10 minute and gain more range in few minute

 

[LSBW]

Very impressive, guys

 

[esoria]

We create from 0 this motorbike last year, with inox iron frame sure not light, but strong, and with my surprise very precise driving! We go with Pmac motor at 30kw burst power, 130V 700A kelly controller and 25A nano battery...
Max speed is very interesting, easy more than 140kmh, but frame is too much heavy for better result....now we work on carbo-alluminum version, we expect nmo more than 60kg ready to run!
Iron version is more than 100Kg!!