portals said:
Yes, I pushed down the down arrow button for 3 secs but it goes in to 'walking' mode at 4mph and does not cruise :-(
Maybe there is another parameter that needs changed, tbh not found very much online that was helpful for these displays re getting cruise to work - does anyone here have cruise working correctly is there a minimum speed you need to reach or somehow turn off walking mode so the long hold triggers cruise?
I used the cruise function when I had my KT controller hooked up. The 3 second thing was a pain. I like just a single button press like my current controller uses, but the actual function of the KT was fine on flat ground. The Cycle Analyst has auto cruise, which I really hate, even though I don't ride around at full throttle much.
So let me know if this is what's happening:
You go to settings and set C7=1, then exit.
You start riding at the speed you want to cruise at (but above 7km/H or 4.3mph), using either PAS or throttle.
While maintaining that speed, you press and hold the down arrow for 3 seconds.
A. Instead of "C" appearing on the display, you get a little walking man, and the bike slows down to 4mph when you stop pedaling/throttling.
B. Alternatively, if it worked right, the "C" appears and you stop pedaling or applying throttle, and the bike maintains speed (on flat ground for the KT).
Holding the down arrow serves two functions (Power Push or Cruise), depending on whether the controller/display thinks the bike is going over or under 4.3 mph.
So is it A or something else?