Sticky thread index for "Motor Technology"

[spinningmagnets]

Please be patient as this information storage will be organized over time. Any moderator may feel free to unlock and expand/re-arrange/improve as you see fit...

RUST: DIY Hub Motor Repair & Restoration
https://endless-sphere.com/forums/viewtopic.php?t=34135

Lebowski DIY axial flux motor
https://endless-sphere.com/forums/viewtopic.php?f=30&t=46476

"Motor PICTURE links, disassembled, hub and non-hub"
https://endless-sphere.com/forums/viewtopic.php?f=16&t=54935

"How to Determine the Wiring for a Brushless Motor" (Fechter, cross-post from tech reference section)
https://endless-sphere.com/forums/viewtopic.php?f=16&t=3484

pics of the insides of geared-hub clutches, MAC and BPM
https://endless-sphere.com/forums/viewtopic.php?f=12&t=88092

"Re-wind of a turnigy 80/100 (Now-tutorial w/Video)" (Thud, 17 pages)
https://endless-sphere.com/forums/viewtopic.php?f=30&t=20618

"Adding hall sensors to outrunners" (Burtie, 16 pages)
https://endless-sphere.com/forums/viewtopic.php?f=30&t=15686

"Optical sensors for commutation -Working" Burtie
https://endless-sphere.com/forums/viewtopic.php?t=28966

"mounting hall sensors to R/C brushless motors" (georgeycc, 11 pages)
https://endless-sphere.com/forums/viewtopic.php?f=30&t=9061

DIY shaft encoder, 3 Halls, 8 magnets, 3D-printed holder
https://endless-sphere.com/forums/viewtopic.php?f=12&t=93048&start=25#p1416679

"Timing Adjustment Tool" (Burtie, 18 pages)
https://endless-sphere.com/forums/viewtopic.php?f=2&t=19054

"Optical sensors for commutation -Working" (Burtie, 4 pages)
https://endless-sphere.com/forums/viewtopic.php?f=2&t=28966

"Adding burtie internal optical sensors to Astro 3210" (http://www.recumbents.com, one page)
https://endless-sphere.com/forums/viewtopic.php?f=28&t=39035

"ES Motor Project?" (Miles, 8 pages)
https://endless-sphere.com/forums/viewtopic.php?f=30&t=40092

"DIY 10awg phase leads through axle in 9C hubmotor." (liveforphysics, 5 pages)
https://endless-sphere.com/forums/viewtopic.php?f=2&t=14580

"Building a DIY triple stator axial flux motor" (Lebowski, 8 pages)
https://endless-sphere.com/forums/viewtopic.php?f=30&t=46476

 

[spinningmagnets]

"Ideas for dynos"
https://endless-sphere.com/forums/viewtopic.php?f=30&t=45869

"Throttle control modes"
https://endless-sphere.com/forums/viewtopic.php?f=30&t=78882

"Partial throttle and motor efficiency"
https://endless-sphere.com/forums/viewtopic.php?f=30&t=79229

"Battery amps Vs phase amps/ratio?"
https://endless-sphere.com/forums/viewtopic.php?f=14&t=82510

 

[spinningmagnets]

"Very good magnet bonding epoxy" (bigmoose, Doctorbass)
https://endless-sphere.com/forums/viewtopic.php?t=27270

"Switched reluctance motors"
https://electricmotorcycle.com/switched-reluctance-motors/

 

[spinningmagnets]

CONTROLLER LINKS

"How to determine the wiring for a brushless motor"
http://endless-sphere.com/forums/viewtopic.php?f=16&t=3484

"Lebowski's motor controller IC, schematic and setup manual" (Lebowski, 48 pages)
[plus index in first post, to all Lebowski threads]
https://endless-sphere.com/forums/viewtopic.php?f=30&t=36602

Sensorless motor control from a standstill (Lebowski)
https://endless-sphere.com/forums/viewtopic.php?f=30&t=94865

"SiliXcon FOC Controllers, small, powerful and many features" (madin88, one page)
https://endless-sphere.com/forums/viewtopic.php?f=30&t=98246

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


VESC based DIY controller links

"VESC-controller: Axiom hardware released!" (from marcos, 11 pages)
https://endless-sphere.com/forums/viewtopic.php?f=30&t=89056&sid=64159ea471b0faf1b02bd40703c7fa79

"BESC - beefed up VESC motor controller for high power ebikes" (galp, 3 pages)
https://endless-sphere.com/forums/viewtopic.php?f=30&t=97765

"Serious FOCer (84V VESC 6 based controller)" (shaman, 3 pages)
https://endless-sphere.com/forums/viewtopic.php?f=30&t=99152

 

[amberwolf]

60 degree motor / 120 degree controller incompatibility fix:
https://endless-sphere.com/forums/viewtopic.php?f=2&t=106763