Lebowski
10 MW
The controller can do sensored but for the specific application (DD hubmotor) I don't see the point
of sensored. I did not solder in the extra components necessary for sensored and did not connect the wiring.
If used, sensored will only be used to start the motor, once over several 100 e-rpm it will transide to
sensorless anyway as sensorless is the only way to have automatic timing compensation (necessary
because of the motor inductance)
Nieles has used the controller IC for I think it is a 6754 (or something like that), an RC motor...
also, see:
http://www.endless-sphere.com/forums/viewtopic.php?f=30&t=34231&start=45#p510455
http://www.endless-sphere.com/forums/viewtopic.php?f=30&t=34231&start=60#p510516
of sensored. I did not solder in the extra components necessary for sensored and did not connect the wiring.
If used, sensored will only be used to start the motor, once over several 100 e-rpm it will transide to
sensorless anyway as sensorless is the only way to have automatic timing compensation (necessary
because of the motor inductance)
Nieles has used the controller IC for I think it is a 6754 (or something like that), an RC motor...
also, see:
http://www.endless-sphere.com/forums/viewtopic.php?f=30&t=34231&start=45#p510455
http://www.endless-sphere.com/forums/viewtopic.php?f=30&t=34231&start=60#p510516