TSDZ2, OSF - throttle not working

[Platypus]

I have installed a TSD2 on my recumbent with open source firmware, but the throttle does not work. When I twist the throttle, nothing happens.

The motor is the 8 pin version, from eco-bike.com in TN, USA. The battery is from AliExpress. The throttle is a twist grip. Walk Assist works fine. Pedal assist works fine.

Can someone advise me please?

 

[Platypus]

Further info:
I am using the 860c display. The firmware version is 1.0.0. I have enabled "street mode" in the configurations. I have set throttle to be "enabled" in Street Mode. There is still no response from the throttle, whether the word "assist" is in orange or in white.

 

[CatfishMan]

Yeah my throttle hasn't worked since I updated to the latest custom firmware. I mentioned it in the main TSDZ2 CFW thread but I don't think anyone said anything. I guess not too many people use a throttle. Even I never do even though I have one.

 

[casainho]

Further info:
I am using the 860c display. The firmware version is 1.0.0. I have enabled "street mode" in the configurations. I have set throttle to be "enabled" in Street Mode. There is still no response from the throttle, whether the word "assist" is in orange or in white.

Other users validated that throttle works. Maybe you did some wrong configuration, check again the configurations, see the wiki page.