Redtungsten
10 µW
Hello I have a cheap folding bike that I use for commuting and I love everything about it except it lacks a bit of power .the stock bike came with 12.5ah 48v battery but I managed to get a 17ah 52volt battery from Amazon that fits in the frame perfectly. On my first ride this morning the bike performed well I could notice my top speed went up by 3kph and felt a bit more torque. But about 15 minutes into the ride with heavy on/off throttling and peddling until I hopped over a speed bump and when the front end came down everything shut off(may be a coincidence)
I checked the motor and battery were not hot and tried to power up but nothing . Checked all connectors were good and After about 5 minutes I was able to power up again but it cut out after another 2 minutes .
From reading other posts it seems this may be a bms issue ? Is it possible that the controller or display is causing the issue ? I’m looking at upgrading the controller and display but if the battery is the issue I would prefer to deal with that first . Being an in frame battery there aren’t many options for replacement
Thanks for any help !
I checked the motor and battery were not hot and tried to power up but nothing . Checked all connectors were good and After about 5 minutes I was able to power up again but it cut out after another 2 minutes .
From reading other posts it seems this may be a bms issue ? Is it possible that the controller or display is causing the issue ? I’m looking at upgrading the controller and display but if the battery is the issue I would prefer to deal with that first . Being an in frame battery there aren’t many options for replacement
Thanks for any help !