TylerDurden
100 GW
You sure that wasn't the:Ypedal said:my HT.. had a friend comment once " Whoa.. what a rush.. i'm sweating "
HB = homebrew
HG = homegrown
Three's a charm.

You sure that wasn't the:Ypedal said:my HT.. had a friend comment once " Whoa.. what a rush.. i'm sweating "
Awright I'll bite! Is that a lock??????TylerDurden said:Here's a hint:
I have other interests too, but we'll start here. :wink:
sleeeeeeeeeeeper.Lenk42602 said:Close ..... '58 .....
2110 gene berg engine
full flow oil system
dual weber 40's
FAST!!!
pwbset said:ngocthach1130 said:I really want to join stuff like hang glide and paraglide.
The thing about paragliding is that it's a huge up front cost, but essentially "free" after that... just transportation costs really. The gear will last you for many, many years if cared for properly. I paid around $5,000 for my whole setup including all the gizmo extra gadgets like Flytec variometer and GPS and such that aren't really that necessary. I got my rig in 2000 and sold the whole thing in 2006 for $2,250 after flying the snot out of it so it holds it's value pretty well also. It's an incredibly addicting activity, but it's not agro unless you want it to be. Soaring in lazy, fat thermals with local hawks at 22mph thousands of feet over the ground on a sunny afternoon is pretty close to heaven.
I would advise NOT cheaping out on flying gear... it is your life you're talking about here and you'll be bummed if you die from buying shitty gear. :wink: Don't even think about ebay etc. Go through a reputable flying school.
Start here: http://www.ushpa.aero
Good luck and be safe! Paragliding is 94% personal judgement, 3% weather, 2% luck and 1% skill.
deardancer3 said:We are already harvesting tomatoes. Hope to keep this up to thanksgiving. some heirlooms, some otherwise.
PJD said:I've been Hang gliding since the early 1990's.
OpAmp said:Here's some pictures of my Bearded Dragon, He's over 10 years old!
I realize things practically don't rust in much of the US seeing how there's ancient 20 year old cars that still run, but that thing looks wrong to me without extensive rust everywhere, especially heater channels all opened up along the bottom of the doors.Lenk42602 said: