What is this motor plug from Aventon fat bike?

[Chalo]

My work was just donated this motor taken off a piece of Aventon garbage. I can't even test it unless I come up with an adapter cable (or worse, amputate the plug and tease out all the wires).

Google Lens is no help at all in this case. Does anybody here know what to call this ten pin plug? Better yet, does anybody know where to find an adapter cable for it?

 

[The Toecutter]

Appears to be an L1019.

Example:

https://www.mutuallc.com/L1019-screw-locking-10-pin-Motor-connector-pd40670181.html

 

[offGridDownUnder]

Curious implementation. It's not obvious from this photograph that this is much electrical isolation of the pins from the metal housing.

 

[linklemming]

Grin uses the L1019 cable for many of its higher power motors like GMAC, All Axle, RH212

 

[Chalo]

Cool, thanks. I think I can find what I need with that information.

 

[derekderek]

here is plug number and link to a guywho has it in stock. L1019 Male to L1019 Female Motor Cable Extension

 

[derekderek]

i ordered it to my old address. ordered another to here and looked up the order when i saw this post. i bought it to cut up to make a 6-pin plus bullets standard end without cutting up orig stuff. anyway, looking this up just got me a 30 buck refund after first one got returned. another link. this is that plug to standard 9-pin. but it also has the pinout on the 1st pic. L1019 to Z916 Motor Cable Adapter

 

[Chalo]

here is plug number and link to a guywho has it in stock. L1019 Male to L1019 Female Motor Cable Extension

Cool, that's the best price I've seen yet. Thanks for the tip.

 

[slaphappygamer]

I bought a Z910 extension cable once. I thought they were all the same (with 14AWG) and bought the cheapest one. They used 18AWG for the phase wires. Im not sure what gauge they use for the L1019 cable, but might be worth a check to the vendor if the phase wire gauge is of concern.