AussieJester
1 TW
^^^^ +1 Put me down for one if you decide to make them
KiM
KiM
Similar to 123D?Samd said:Have you seen the xbox hack? Free threed scanner.
The problem is stem profile/size varies a fair bit.Hyena said:large CA mounts to go around stems
Oh yeah that's what I actually meant when I said around the stem - I meant around as in just not offset to one side. So either dual clamps as you said, or an offset that essentially puts the mount off to one end of the CA so to body of it sits over the top of the middle of the stem and centres the CA on the bars. Or as Sam said you could mount it via the star nut. I guess the star nut version would be slightly more universal in terms of different bar sizes and what not, though not as sturdily mounted as dual bar clamps. I know jarring around over rough terrain at speed the one on my fighter is always coming loosefull-throttle said:The problem is stem profile/size varies a fair bit.
Two clamps around the handlebars would be better I think. A lot less variation, more forward screen position, easily adjustable screen angle, twice as many attachment points.. etc
Ah ok then. So two hinged clamps to allow for 25.4 and 31.8 bars, 60~70mm apart? Optional mount for lights underneath the CA? Most chinese lights like Migicshine use crappy o-rings..Hyena said:Oh yeah that's what I actually meant when I said around the stem
Something like this ?Samd said:I could make it easily to attach via the headstem nut
Mounts for lights would be cool. I'm not familiar with migicshine, are they a kiwi made one ?full-throttle said:So two hinged clamps to allow for 25.4 and 31.8 bars, 60~70mm apart? Optional mount for lights underneath the CA? Most chinese lights like Migicshine use crappy o-rings..
Samd said:I could make it easily to attach via the headstem nut
Bloody Justin, trust him to think of everything.Something like this ?
Very funny bro :lol:Hyena said:I'm not familiar with migicshine, are they a kiwi made one ?
Samd said:I'm trying to see what Kepler has there for it's mounting.
Samd said:Well, it's on the printer, images every 3 mins, in about 3 mins
https://drive.google.com/folderview?id=0B9yGWuHxeLnjM29jZC16QURIV3M&usp=sharing
Hugues said:Samd said:Well, it's on the printer, images every 3 mins, in about 3 mins
https://drive.google.com/folderview?id=0B9yGWuHxeLnjM29jZC16QURIV3M&usp=sharing
That's cool !
Which program do you use to upload these images directly to Google drive ?
You better invest in better quality units that the ones currently uploading to your share or the images of your thieves may as well be characters from 8 bit video gamesSamd said:About to order another 4 webcams for my shed to point out into the yard for security. You can break in and steal my old laptop - too bad you're already on the web chump! Suck it!