• Hello ES! We could use some help to get us past the finish line on building the new knowledgebase for the forum.
    Can you donate? Please see our fundraising page. Thank you!

stiga c300 - electric tractor, ride on lawnmower (MODS)

I hardcoded my wifi name and password to code - now if my dash found one of my wifi - it will connect automatically - so I can put IP in browser and check status live - WiFi icon pop out

if it cant found my Wifis then AP icon pop out - but AP is availble all the time


I aslo added wifi signal strenght in %
 

Attachments

  • IMG_5724.JPEG
    IMG_5724.JPEG
    1.4 MB · Views: 2
  • IMG_5736.JPEG
    IMG_5736.JPEG
    2 MB · Views: 1
Last edited:
86 inch dashboard on local network when tractor is ON
 

Attachments

  • IMG_5749.JPEG
    IMG_5749.JPEG
    1.2 MB · Views: 5
remeber this first actuator which has too long spacing mount? its perfect for basketless model - I mount it in ALPINA AT3 98li within several minutes

its controlled by separate ESP32 but it I will integrate to main one

power consumption of actuator is preety low
0,5A down (12W)
1,5-1,7A up (40W)
 

Attachments

  • IMG_5912.JPEG
    IMG_5912.JPEG
    3.8 MB · Views: 2
  • IMG_5914.JPEG
    IMG_5914.JPEG
    1.8 MB · Views: 1
  • IMG_5908.JPEG
    IMG_5908.JPEG
    1.7 MB · Views: 2
  • IMG_5907.JPEG
    IMG_5907.JPEG
    2 MB · Views: 2
BTW all cell connectors are on top below plastic top shell - it very easy to connect active balancer or cell monitoring to it
 

Attachments

  • IMG_5890.JPEG
    IMG_5890.JPEG
    3.2 MB · Views: 4
3d print time
 

Attachments

  • IMG_5968.JPEG
    IMG_5968.JPEG
    3.7 MB · Views: 2
  • IMG_5971.JPEG
    IMG_5971.JPEG
    1.5 MB · Views: 2
  • IMG_5970 (1).JPEG
    IMG_5970 (1).JPEG
    2.6 MB · Views: 2
Back
Top