BBS02 Throtle Programing

[lcarron]

I have a BBS02 750 detuned to 18 Amp which is around 500W when using pedal assist. When using the throttle Is draw 18Amps and the power is around 800W.
I would like to limit the throttle to 500W as well. How can I accomplish that? I have the cable and program to tuned it but did not found any strait option but got an idea I need your advise.

- Limit the Amp to 10 on the basis setting
- set the "Keep current %" to 100% on the pedal assist tab instead of 60%
- Set the "mode" to current in the throttle handle section
Do you think that should work?

thanks in advance

 

[amberwolf]

Does anything here help?
http://www.endless-sphere.com/forums/viewtopic.php?f=28&t=58780

 

[astmacca]

[ I would like to limit the throttle to 500W as well. ]

Pick a PAS level that maxes out at 500W and refer to that on the throttle settings page??

 

[lcarron]

Thanks astmacca! it worked!

 

[--freeride--]

18A is 48V*18A=864W so if you only see 500W in PAS you have keep current on a lower setting...