I have em200sp, when I changed voltage to 48V and saved params, next time I connected, the voltages remained changed but the throttle and start settings were all 0's. I set them and saved param, next time I connected they were back to 0. The params on the next pages seem ok. I tried both EM_V60 and EM_V3-EMsport-SIA and they both do the same thing. EM_V3-EMsport-SIA shows SW: 2.2 and HW: 1.03. I am guessing my problem is old controller firmware. Does anyone have current Em200SP firmware that works with EM_V60 or EM_V3-EMsport-SIA
Thank-you in advance.
https://www.facebook.com/groups/199...Hb2F4ip7oQ_queNqP_GWfon9fAhTO35g&__tn__=<,P-R
Thank-you in advance.
https://www.facebook.com/groups/199...Hb2F4ip7oQ_queNqP_GWfon9fAhTO35g&__tn__=<,P-R
