ok, easy fix for my dropping chain problem (lets see if it works long term)... I just reinstalled my front derailleur and locked it out with the adjustment screws to be in the right position.
Now... back to my alignment issues... i not have a sneaky suspicion that its the front part of the kit moving towards the right, therefore putting the front jackshaft out of alignment with the 80T gear and slackening the chain... after a while...
i have seen a few peoples solutions to reinforcing it so the pipe clamps don't slip and allow the kit to pull over, but I'm just wondering if there is a LR approved method for fixing this...
Now... back to my alignment issues... i not have a sneaky suspicion that its the front part of the kit moving towards the right, therefore putting the front jackshaft out of alignment with the 80T gear and slackening the chain... after a while...
i have seen a few peoples solutions to reinforcing it so the pipe clamps don't slip and allow the kit to pull over, but I'm just wondering if there is a LR approved method for fixing this...