Hi,
My hub motor hums very strong and stalls when i accelerate from stand still.
One I start rolling, i release the throttle for a second and then it disappears and the bike accelerates and cruises ok.
Its a 250w motor.
1. I recently swapped the esc to a 350w and rephased the motor (tought it the correct direction) for the first few rides it was ok and then it started with this hum+stall.
2. I added a display (sw900) and i have an error code 007, i added the display only after the humming so i am not sure if it is related or not to the problem at hand
3.the display shows speed only when i push the throttle, i can be cruising at 30 kph, if i let the throttle go, it shows 0 kph.. I assume its probably unrelated.
Uploaded a short clip:
https://youtube.com/shorts/s6rcREhMcWA?feature=share
My hub motor hums very strong and stalls when i accelerate from stand still.
One I start rolling, i release the throttle for a second and then it disappears and the bike accelerates and cruises ok.
Its a 250w motor.
1. I recently swapped the esc to a 350w and rephased the motor (tought it the correct direction) for the first few rides it was ok and then it started with this hum+stall.
2. I added a display (sw900) and i have an error code 007, i added the display only after the humming so i am not sure if it is related or not to the problem at hand
3.the display shows speed only when i push the throttle, i can be cruising at 30 kph, if i let the throttle go, it shows 0 kph.. I assume its probably unrelated.
Uploaded a short clip:
https://youtube.com/shorts/s6rcREhMcWA?feature=share