LeftCoastNurd
100 W
- Joined
- Oct 22, 2019
- Messages
- 127
on my hybrid, I had to loosen everything up quite a bit, then pre-thread that torque bolt and block loosely in place, THEN snug things down incrementally. when the motor was in the proper position I could not possibly get the torque block in place, but successively tightening things and it all went together correctly.
if it hadn't worked, I'd intended to get a block of aluminum, and machine a custom torque block.
if it hadn't worked, I'd intended to get a block of aluminum, and machine a custom torque block.